ADDITIONAL DESCRIPTION Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors in power ratings from 2.2 to 1375 kW. SSW06 Series Soft-Starter are static starters intended to accelerate, decelerate and protection of three phase induction motors. The control of the voltage applied to the motor by the means of the thyristors triggering angle variation, allows the soft-start to start and stop smoothly an electric motor. With adequate adjustments of the variables, the torque produced is adjusted to the needs of the load, so the required current is going to be as low as possible for the starting procedure.
| Current Rating | 412 A |
|---|---|
| frame | 5 |
| enclosure | IP00 |
| product certification | UL, CE, CS, IRAM and C-TICK |
| torque control | Yes |
| modbus-rtu rs-232 | Yes |
| pump control | Yes |
| voltage ramp | Yes |
| parameterization via software | Superdrive G2 |
| rated current | 412 A |
| power supply | 220-575 V |
| starting regime (with ventilation kit) | No |
| inside delta (6 leads) | Yes |
| parameterization via trimpots and dip switches | No |
| modbus-rtu rs-485 | Available with optional |
| starting duty cycle | 330 |
| current limit | No |
| parameterization via keypad | Yes |
| current limitation ramp | Yes |
| modbus-rtu usb | Yes |
| standard (3 leads) | Yes |
| voltage ramp and current limit | Yes |
| direct on line start | No |
| soft plc (ladder programming) | Yes, 1K bytes |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | WEG Electric |
| Vendor SKU | 1308052 |
| Lead Time | 1 day |