EnclosureTEFCFrame56CFrame MaterialSteelFrequency60 HzOutput @ Frequency1.500 HP @ 60 HZPhase3Synchronous Speed @ Frequency1800 RPM @ 60 HZVoltage @ Frequency460.0 V @ 60 HZ230.0 V @ 60 HZXP Class and GroupNoneXP DivisionNot ApplicableAgency ApprovalsCSACSA EEVURAmbient Temperature40 CAuxillary BoxNo Auxillary BoxAuxillary Box Lead TerminationNoneBase IndicatorNo MountingBearing Grease TypePolyrex EM (-20F +300F)BlowerNoneCurrent @ Voltage2.200 A @ 460.0 V4.400 A @ 230.0 V4.500 A @ 208.0 VDesign CodeBDrip CoverNo Drip CoverDuty RatingCONTEfficiency @ 100% Load86.5 %Electrically Isolated BearingNot Electrically IsolatedFeedback DeviceNo FeedbackHigh Voltage Full Load Amps2.2 aFront Face CodeStandardFront Shaft IndicatorNoneHeater IndicatorNo HeaterInsulation ClassFInverter CodeInverter ReadyKVA CodeLLifting LugsNo Lifting LugsLocked Bearing IndicatorLocked BearingMotor Lead ExitKo BoxMotor Lead TerminationFlying LeadsMotor Lead Quantity/Wire Size9 @ 18 AWGMotor Type3526MMounting ArrangementF1Number of Poles4Overall Length13.24 INPower Factor73Product FamilyDirty Duty (Not For DC)Pulley End Bearing TypeBallPulley Face CodeC-FacePulley Shaft IndicatorStandardRodent ScreenNoneService Factor1.15Shaft Diameter0.625 INShaft Extension LocationPulley EndShaft Ground IndicatorNo Shaft GroundingShaft RotationReversibleShaft Slinger IndicatorShaft SlingerSpeed1760 rpmSpeed CodeSingle SpeedMotor StandardsNEMAStarting MethodDirect on lineThermal Device - BearingNoneThermal Device - WindingNoneVibration Sensor IndicatorNo Vibration SensorWinding Thermal 1NoneWinding Thermal 2None ADDITIONAL DESCRIPTION See all of our
| Power | 1.5 |
|---|---|
| Rated Speed | 1700 - 1800 |
| Frame Size | 56C |
| Voltage | 230/460 |
| Motor Enclosure Type | Totally Enclosed Fan Cooled |
| Electrical Phase | Three-Phase |
| Frequency | 60 |
| Shaft Diameter | 5/8″ |
| enclosure | TEFC |
| frame | 56C |
| frame material | Steel |
| output @ frequency | 1.500 HP @ 60 HZ |
| phase | 3 |
| synchronous speed @ frequency | 1800 RPM @ 60 HZ |
| voltage @ frequency | 460.0 V @ 60 HZ |
| xp class and group | None |
| xp division | Not Applicable |
| agency approvals | CSA |
| ambient temperature | 40 C |
| auxillary box | No Auxillary Box |
| auxillary box lead termination | None |
| base indicator | No Mounting |
| bearing grease type | Polyrex EM (-20F +300F) |
| blower | None |
| current @ voltage | 2.200 A @ 460.0 V |
| design code | B |
| drip cover | No Drip Cover |
| duty rating | CONT |
| efficiency @ 100% load | 86.5 % |
| electrically isolated bearing | Not Electrically Isolated |
| feedback device | No Feedback |
| high voltage full load amps | 2.2 a |
| front face code | Standard |
| front shaft indicator | None |
| heater indicator | No Heater |
| insulation class | F |
| inverter code | Inverter Ready |
| kva code | L |
| lifting lugs | No Lifting Lugs |
| locked bearing indicator | Locked Bearing |
| motor lead exit | Ko Box |
| motor lead termination | Flying Leads |
| motor lead quantity/wire size | 9 @ 18 AWG |
| motor type | 3526M |
| mounting arrangement | F1 |
| number of poles | 4 |
| overall length | 13.24 IN |
| power factor | 73 |
| product family | Dirty Duty (Not For DC) |
| pulley end bearing type | Ball |
| pulley face code | C-Face |
| pulley shaft indicator | Standard |
| rodent screen | None |
| service factor | 1.15 |
| shaft extension location | Pulley End |
| shaft ground indicator | No Shaft Grounding |
| shaft rotation | Reversible |
| shaft slinger indicator | Shaft Slinger |
| speed code | Single Speed |
| motor standards | NEMA |
| starting method | Direct on line |
| thermal device - bearing | None |
| thermal device - winding | None |
| vibration sensor indicator | No Vibration Sensor |
| winding thermal 1 | None |
| winding thermal 2 | None |
| hz | 60 |
| hp | 1.5 |
| rpm | 1700 - 1800 |
| weight | 41.000 lb |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Baldor |
| Vendor SKU | 2840815 |
| Lead Time | 1 day |