The next generation KIIS Series offers an optimally designed, high efficiency next generation three-phase motor that incorporates higher strength gears that maximizes the motor performance.Higher Permissible TorqueLow Noise
| Power | 100 W (1/8 HP) |
|---|---|
| Gear Ratio | 5 |
| Rated Speed | 300 [50 Hz] 360 [60 Hz] |
| Rated Torque | 2.6 N·m [60 Hz] 3.1 N·m [50 Hz] |
| Frame Size | 90 mm |
| Voltage | Three-Phase 220/230 VAC |
| Current | 0.55 A [220 VAC, 50 Hz] 0.57 A [230 VAC, 50 Hz] 0.48 A [60 Hz] |
| Electrical Phase | Three-Phase 220/230 VAC |
| Frequency | 60 50 |
| Shaft Type | Parallel Shaft Gearhead |
| Shaft Diameter | 3/4″ |
| Ip Rating | IP20 |
| product line | Oriental Motor® |
| motor type | Induction |
| frame size(imperial) | 3.54 in |
| output power | 100 W (1/8 HP) |
| voltage (vac) | Three-Phase 220/230 VAC |
| frequency (hz) | 60 50 |
| type | Lead Wire |
| electromagnetic brake | Not Equipped |
| shaft/gear type | Parallel Shaft Gearhead |
| gear ratio (x:1) | 5 :1 |
| output shaft diameter | 3/4 in. |
| rated torque(imperial) | 23 lb-in [60 Hz] 27 lb-in [50 Hz] |
| rated speed (rpm) | 300 [50 Hz] 360 [60 Hz] |
| permissible load inertia | 27.5 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 150 oz-in² |
| permissible overhung load | 10 mm from Shaft End = 400 N 20 mm from Shaft End = 500 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 90 lb 0.79 in. from Shaft End = 112 lb |
| permissible thrust load | 150 N |
| permissible thrust load(imperial) | 33 lb |
| rohs compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| safety standards | UL CCC CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity. |
| temperature rise | A gearhead or equivalent heat sink [7.87 x 7.87 in. (200 x 200 mm), 0.20 in. (5 mm) thick, material aluminum] is connected to the motor and the winding temperature rise is measured at 144ºF (80ºC) or less using the resistance change method after |
| thermal class | 130 (B) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% or less (noncondensing) |
| degree of protection | IP20 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 5IK100VGVR-ES / 5GVR5A |
| Lead Time | Estimated Ship: 10/22/2024 |