QSH2818-32-07-006 is a two phase hybrid stepper motor. It is optimized for microstepping and gives good fit to the TRINAMIC family of motor controllers and drivers. It can be used in very small space and critical applications. Which allow high RPM due to their low back EMF. Length is 1.2inch Step angle is 1.8Ëš, NEMA 11 mounting configuration Optimized for microstep operation Optimum fit for TMC222/TMC236/TMC246/TMC262 based driver circuits 4 wire connection, dielectric strength (for one minute) is 500VAC Operating voltage range is 3.8V Rated phase current is 0.67A Operating temperature range is -20°C to +50°C Phase resistance at 20°C is 5.6ohm Phase inductance (typ) is 3.4mH WarningsMarket demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
| Holding Torque | 6 N*cm |
|---|---|
| Step Angle | 1.8 deg |
| Motor Frame Size | 28 mm |
| Input Current | 670 mA |
| Input Voltage | DC 6.2 V |
| Shaft Diameter | 5 mm |
| torque max | 6N-cm |
| resistance | 5.6ohm |
| inductance | 3.4mH |
| inertia | 9g-cm² |
| voltage rating max | 3.8VDC |
| external length | 32mm |
| coil type | Bipolar |
| stepper motor type | Single Shaft, Hybrid |
| motor size | 28mm |
| current rating | 670mA |
| no. of phases | Two Phase |
| no. of wires | 4 |
| shaft length | 18mm |
| product range | QMot QSH2818 Series |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | TRINAMIC / ANALOG DEVICES |
| Vendor SKU | 65AC6268 |
| Lead Time | Most orders of US in-stock items will ship either the same day or next business day. |