8 Port PoE Switch With 2 Uplink 120W Extend to 250Meter Unmanaged 803.af/at

10/100 Mbps access, Dual RJ45 port uplink Provides 8*10/100 Base-TX RJ45 ports and dual uplink power ports, which is more convenient for users to flexibly set up to meet the network requirements of various scenarios Support non-blocking wire-speed forwarding. Support full-duplex based on IEEE 802.3 x and half-duplex based on backpressure. Intelligent PoE power supply function 8*10/100 Base-TX RJ45 ports support PoE power supply, which meets the needs of PoE power supply in various scenarios in the security field Comply with IEEE 802.3 af /at PoE power supply standard, automatically identify PoE devices for power supply without damaging non-PoE devices. The maximum PoE output power is 65W, and the maximum PoE output power of a single port is 30W Innovative function (only with function switch type) Long distance file: When opening, the speed of 1-8 port is reduced to 10M. With the existing twisted pair cable, the transmission limit of the twisted pair line can be broken, and the transmission distance can reach 250 meters; on the other hand, It can solve the problem of poor transmission caused by line aging. Video monitoring mode: Open with the long distance switch, 1-4 ports are isolated from each other but communicate with 9-10 ports to prevent DHCP conflicts, optimize port cache utilization, and reduce broadcast storms. The equipment is stable and reliable The host has low power consumption, no fan and silent design, galvanized steel and metal casing, and excellent heat dissipation to ensure stable operation of the product The equipment fully complies with the CCC, CE, FCC, RoHS safety requirements, and is safe and reliable. The equipment is stable and reliable The host has low power consumption, no fan and silent design, galvanized steel and metal casing, and excellent heat dissipation to ensure stable operation of the product The equipment fully complies with the CCC, CE, FCC, RoHS safety requirements, and is safe and reliable. Model PS-82-96 Interface Characteristics Fixed Port 8*10/100Base-TX PoE ports (Data/Power) 2*10/100Base-TX uplink RJ45 ports (Data) Ethernet Port Port 1-8 can support IEEE 802.3 af/at standard PoE power supply Functional Switch 1*(Extender+ CCTV) Note: when the switch state changes, it must be restarted before the PoE switch function can take effect Chip Parameter Network Protocol IEEE 802.3 10BASE-T; IEEE 802.3 i 10Base-T; IEEE 802.3 u 100Base-TX; IEEE 802.3 x PoE Standard IEEE 802.3 af/at international standard Ethernet Port Port 1-10 can support 10/100BaseT (X) auto detect, full / half duplex MDI / MDI-X adaptive Forwarding Mode Store and Forward (Full Wire Speed) Switching Capacity 2Gbps (Non-blocking)2Gbps Forwarding Rate@64byte 1.488M pps Mac 1K Buffer Memory 768K Twisted Pair Transmission 10BASE-TX: Cat5 or later UTP (250 meter) 100BASE-TX: Cat5 or later UTP (100 meter) LED Indicator power indicator: PWR (green); network indicator: Link (yellow); POE working indicator: PoE (green) functional switch indicator: EXTEND (green) PoE & Power PoE Port Port 1 to 8 IEEE 802.3 af/at @ POE Power Supply Pin Default 1/2(+), 3/6(-); Optional 4/5(+), 7/8(-) 2-pairs power supply Max Power Per Port 30W/ 15.4W Total PWR / Input Voltage 120W (AC100-240V) Power Supply Built-in switching power supply, AC100~240V 50-60Hz 2.2A Power Consumption Standby