These motors are coupled to an AC electromagnetic brake which is activated when power is not applied. When the power source is turned off, the motor stops instantaneously and holds the load.Power off activated type electromagnetic brakeConforms to safety standards and global power supply voltages
| Power | 200 W (1/4 HP) |
|---|---|
| Gear Ratio | 75 |
| Rated Speed | 20 [50 Hz] 24 [60 Hz] |
| Rated Torque | 350 lb-in |
| Frame Size | 104 mm |
| Voltage | Three-Phase 200/220/230 VAC |
| Current | 0.95 A [220/230 VAC] 1.1 A [200 VAC] |
| Electrical Phase | Three-Phase 200/220/230 VAC |
| Frequency | 60 50 |
| Shaft Type | Parallel Shaft Gearhead |
| Shaft Diameter | 18 mm |
| Ip Rating | IP54 |
| product line | Oriental Motor® |
| motor type | Electromagnetic Brake - Induction |
| frame size(imperial) | 4.09 in |
| output power | 200 W (1/4 HP) |
| voltage (vac) | Three-Phase 200/220/230 VAC |
| frequency (hz) | 60 50 |
| shaft/gear type | Parallel Shaft Gearhead |
| gear ratio (x:1) | 75 :1 |
| output shaft diameter | 18 mm |
| electromagnetic brake | Equipped |
| rated torque(imperial) | 350 lb-in |
| rated speed (rpm) | 20 [50 Hz] 24 [60 Hz] |
| permissible load inertia | 27250 oz-in 2 |
| permissible load inertia(imperial) | 27250 oz-in² |
| permissible overhung load | 10 mm from Shaft End = 650 N 20 mm from Shaft End = 1000 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 146 lb 0.79 in. from Shaft End = 220 lb |
| permissible thrust load | 200 N |
| permissible thrust load(imperial) | 45 lb |
| rohs compliant | Yes |
| safety standards | UL CSA EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity. |
| insulation class | Class B (266ºF [130ºC]) |
| dielectric strength | Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) [Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC)] (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| degree of protection | IP54 |
| voltage (brake) | Single-Phase 220/230 VAC |
| current (brake) | 0.09 A |
| input | 12 W |
| static friction torque | 1.5 N·m |
| static friction torque(imperial) | 210 oz-in |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | BHI62SMT-75 |
| Lead Time | Estimated Ship: 10/29/2024 |