118 Degree General Purpose Jobber Length Drill Cleveland 2002 Bright HSS RHS/RHC #70
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 1-1/4 in |
| Drill Bit Point Angle | 118 Degrees |
| Drill Bit Size | #70 |
| Number of Flutes | 2 |
| Shank Dia. | 1/64 in |
| Material - Machining | High Speed Steel |
| Cutting Direction | Right Hand |
| Finish - Machining | Bright |
| Shank Type - Machining | Straight |
| Standards | ASME B94.11M |
| Application | Carbon Steel, Cast Iron, Non-Ferrous Materials |
| Flute Type | Spiral |
| Flute Length | 3/8 in |
| List Number | 2002 |
| Decimal Equivalent | 0.028 |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Dimension Type | Wire |
| Depth:Dia. Ratio | 4 xD |
| Coolant Fed | Non-Coolant Through |
| Diameter | 0.024 |
| Drill Style | Jobber Drill |
| Shank Length | 7/8 in |
| Measurement System | Wire |
| Shank Size | 0.024 |
| Helix Angle | 21 Degrees to 34 Degrees |
| Primary Material Application | Non-Ferrous Material, Aluminum |
| Spiral Direction | Right Hand |
| Drill Point Length | 0.0084 in |
| Material Grade - Machining | High Performance |
| Series | 2002 |
| Secondary Material Application ISO Code | P, K |
| Secondary Material Application | Alloy Steel, Gray Cast Iron, Low Carbon Steel |
| Drill Bit Point Type | Conventional Point |
| Drill Length Class | Jobber Length |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Maximum Drilling Depth | 9/32 in |
| Primary Material Application ISO Code | N |
| Aircraft Drill | No |
| Web Thinning | Thinned |
| Number of Coolant Holes | 0 |
| Sheeter Drill | No |
| Package Quantity | 1 |