Spiral Point Tap, M10-1.5, Plug, Metric Coarse, 3 Flutes, Steam Oxide
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 9.68 mm |
| Tap Material | Cobalt |
| Tap Style | Spiral Point |
| Tap Size | M10 |
| Tap Chamfer | Plug |
| Tap Dimension Type | Metric |
| Overall Length | 100 mm |
| Number of Flutes | 3 |
| List Number | PER-862SP |
| Tap Thread Type | Metric Coarse |
| Tap Grouping | Tap |
| Tap Thread Size | M10-1.5 |
| Thread Direction | Right Hand |
| Thread Length | 20 mm |
| Tap Finish | Steam Oxide |
| Pitch Diameter Limit | Not Rated |
| Standards | ANSI, DIN |
| Number of Pieces | 1 |
| Cutting Direction - Machining | Right Hand |
| Size | M10 |
| Series | PER-862SP |
| Thread Limit | 6H |
| Secondary Material Application | Cast Iron, Stainless Steel, Steel |
| Drill Bit Size | 8.50 mm |
| Extended Neck | Yes |
| Tap Length Standard | DIN |
| Shank Length | 60 mm |
| 55% Thread Drill Size | 8.9 mm |
| Primary Material Application ISO Code | P, M |
| Primary Material Application | Stainless Steel, Steel |
| Square Size | 7.26 mm |
| Thread Pitch | 1.5 mm |
| Thread Size | M10x1.5 |
| Spiral Direction | Neutral |
| Measurement System | Metric |
| Thread Standard | Metric Coarse |
| Tap Shank Standard | ANSI |
| 75% Thread Drill Size | 8.5 mm |
| Shank Type - Machining | Straight |
| 65% Thread Drill Size | 11/32 in |
| Secondary Material Application ISO Code | P, M, K |
| Class of Fit | 6H |
| Helix Angle | 0 deg |
| Package Quantity | 1 |