Acrylic Adhesive, AA H3300 Series, Dual-Cartridge, 1:1 Mix Ratio
| Maximum Performance Temperature | 85 deg F |
|---|---|
| Non-Sagging | Yes |
| Mixing Ratio | 1:1 |
| Low Odor | No |
| Hardener Color | Tan |
| VOC Content Weight Percentage | 1.11% |
| Resin Color | White |
| Features | 100% Reactive, Little or No Surface Preparation, Non-Sagging, Rapid Room Temperature Cure |
| Compatible Mixer Tip | 720173, 720174 |
| Working Time | 4 min |
| Cure Method | Ambient |
| Application Method | Two-Part Dispenser |
| Coverage | Dependent On Substrate |
| VOC Content Weight | 9.8 g/L |
| Tensile Strength | 4,100 to 4,300 psi |
| Interior/Exterior | Exterior, Interior |
| Alternate Product Name | Speedbonder H3300 |
| Minimum Viscosity | 80,000 cps |
| Series | AA H3300 |
| Materials Bonded | ABS Plastic, Metal, Polycarbonate, Stainless Steel, Steel |
| Shear Strength | 3,250 psi |
| Cured Color | Yellow |
| Water Resistance | Water-Resistant |
| Compatible Accelerator | Loctite AA |
| For Use With | Applicator, Mixing Tip |
| Minimum Performance Temperature | 55 deg F |
| Compatible Primer | Loctite 7070 |
| Container Type | Dual-Cartridge |
| Maximum Application Temperature | 95 deg F |
| Hardness at Full Cure | 75 to 80 Shore D |
| Resin Volume | 200 mL |
| Maximum Viscosity | 160,000 cps |
| Standards | ASTM D 638, ASTM D1002, ASTM D1876, ASTM D4501 |
| Marine Grade | No |
| Resin Type | Acrylic |
| Total Volume | 400 mL |
| Item | Acrylic Adhesive |
| Hardener Volume | 200 mL |
| Compatible Applicator | 1,372,751 |
| Included Components | Hardener, Resin |
| Compatible Activator | Not Applicable |
| Primary Applications | General Purpose |
| Full Cure Time | 24 hr |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |