Anaerobic Anaerobic Gasket Maker, 250 mL, Orange, Temp Range up to 300 Degrees F
| Application | Gasketing Product - General Purpose. Ideal for Use on Machined and Rigid Metal Flanges |
|---|---|
| Color | Orange |
| Size | 250 mL |
| Substrates | Metal: Aluminum, Metal: Steel |
| Temp. Range | up to 300 Degrees F |
| For Use On | High Oil Resistance, Excellent Water and Glycol Resistance |
| Item | Anaerobic Gasket Maker |
| Type | Anaerobic |
| Full Cure | 24 hr |
| Begins to Harden | 60 min |
| Green Environmental Attribute | RoHS 2011/65/EU Compliant |
| Flash Point | 199.4 deg F |
| Characteristics | Resistance to Low Pressures |
| Specific Gravity | 1.15 |
| Viscosity | paste |
| Expansion Ratio | Llena Vacíos Hasta de 0.010 in |
| Standards | California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
| Container Type | Tube |
| Chemical Base | Dimethacrylate Ester |
| VOC Content | 6.01 g/L |
| Tensile Strength | 725 psi |
| Container Size | 8.45 fl oz |
| Shear Strength | 870 psi |
| Specific Sealing Application | Rigid Assemblies |
| Series | 574 |
| Non-Hardening | Yes |
| Working Time | 15 min |
| Resistance Properties | Oil Resistant |
| Sealant Type | Gasket Sealant |
| Sensor Safe | No |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Full Cure Time | 1 day |
| Maximum Viscosity | 120,000 cps |
| Minimum Viscosity | 23,000 cps |
| Maximum Operating Temperature | 300 deg F |
| For Material Type | Metal |
| Maximum Gap Fill Size | 0.01 in |
| Product Form | Paste |
| Cure Type | Anaerobic |
| Properties | Oil Resistant |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |