Anaerobic Anaerobic Gasket Maker, 300 mL, Blue, Temp Range -65 to 300 Degrees F
| Application | Make Gaskets for Pumps, Housings, Axle Covers, Gear Cases, Split Crankcases and Other Areas Where Conventional Gaskets Are Used. Also Use to Repair Damaged Conventional Gaskets Or as A Coating/Dressing for Conventional Gaskets. |
|---|---|
| Color | Blue |
| Size | 300 mL |
| Substrates | Metal Flanges |
| Temp. Range | -65 to 300 deg F |
| Sealant Container | Cartridge |
| Item | Anaerobic Gasket Maker |
| Type | Anaerobic |
| Full Cure | 24 hr |
| Begins to Harden | Unprimed: 4 to 24 hr; Primed: 1 to 24 hr |
| Flash Point | 199.4 deg F |
| Specific Gravity | 1.1 kg/m3 |
| Characteristics | Gel-Like Material Used Between Mating Metal Flanges, Fills Surface Imperfections, Provies Tough, Resilient, Solvent and Temperature-Resistant Seal, Flexes With Flange Movements. Fills Gaps to 0.010 in |
| Viscosity | 100,000/500,000 Thixotropic |
| Container Type | Cartridge |
| Standards | California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
| Chemical Base | Methacrylate Ester |
| Container Size | 10.14 fl oz |
| Tensile Strength | 110 psi |
| VOC Content | 89.6 g/L |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Shear Strength | 100 psi |
| Cure Type | Anaerobic |
| Sensor Safe | No |
| Sealant Type | Gasket Sealant |
| Working Time | 1 hr |
| Product Form | Gel |
| Maximum Operating Temperature | 300 deg F |
| For Material Type | Metal |
| Full Cure Time | 1 day |
| Series | 5127 |
| Non-Hardening | Yes |
| Specific Sealing Application | Flexible Assemblies |
| Minimum Operating Temperature | -65 deg F |
| Maximum Gap Fill Size | 0.01 in |
| Resistance Properties | High-Temperature Resistant |
| Maximum Viscosity | 575,000 cps |
| Minimum Viscosity | 65,000 cps |
| Properties | Standard |
| Number of components | 1 Part |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |