Anaerobic Anaerobic Gasket Maker, 50 mL, Pink, Temp Range -65 to 400 Degrees F
| Application | Revolutionized Flange Sealing in The Automotive Industry, The Assembly of Heavy Equipment, and The Manufacture of Various Types of Fluid Power Equipment; Best Suited for Small Gap Applications and Rigid Metal-to-Metal Assemblies |
|---|---|
| Color | Pink |
| Size | 50 mL |
| Substrates | Close-Fitting Metal Surfaces. |
| Temp. Range | -65 to 400 deg F |
| Sealant Container | Tube |
| Item | Anaerobic Gasket Maker |
| Type | Anaerobic |
| Full Cure | 4 hr |
| Begins to Harden | Unprimed: 6 to 48 hr; Primed 1 to 6 hr |
| Viscosity | 188,000/500,000 Thixotropic |
| Flash Point | 199.4 deg F |
| Specific Gravity | 1.17 |
| Standards | California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
| Characteristics | High Temperature. Anaerobic Gasket/Sealant, Solvent and Chemical Resistance. Maintains Clamping Loads For Strong, Leakproof Assemblies. Fills Gaps Up to 0.010 in |
| Container Type | Tube |
| Chemical Base | Dimethacrylate Ester |
| Tensile Strength | 1,085 psi |
| VOC Content | 8.47 g/L |
| Container Size | 1.69 fl oz |
| Sensor Safe | No |
| Full Cure Time | 4 hr |
| Minimum Operating Temperature | -65 deg F |
| Product Form | Gel |
| Cure Type | Anaerobic |
| Resistance Properties | High-Temperature Resistant |
| Clean Up Method | Solvent |
| Series | 510 |
| Specific Sealing Application | Rigid Assemblies |
| Maximum Gap Fill Size | 0.01 in |
| Sealant Type | Gasket Sealant |
| Working Time | 25 min |
| Maximum Operating Temperature | 400 deg F |
| Minimum Viscosity | 40,000 cps |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Maximum Viscosity | 750,000 cps |
| Non-Hardening | Yes |
| Shear Strength | 145 psi |
| For Material Type | Metal |
| Properties | High-Temperature |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |