Anaerobic Gasket Sealant, 300 mL, Red, Temp Range -65 to 300 Degrees F
| Application | Fittings, Gauges, Metal Threads, Pipes, Refrigerant Systems,Stem, Steel and Brass, Valves |
|---|---|
| Color | Red |
| Size | 300 mL |
| Substrates | Rigid Iron, Steel, Aluminum |
| Temp. Range | -65 to 300 deg F |
| Sealant Container | Cartridge |
| Item | Gasket Sealant |
| Type | Anaerobic |
| Full Cure | 4 hr |
| Begins to Harden | 30 min |
| Flash Point | 212 deg F |
| Viscosity | paste |
| Expansion Ratio | Fills gaps up to 0.009 in |
| Specific Gravity | 1.1 |
| Characteristics | General Purpose, Rigid, Thixotropic |
| Standards | California Proposition 65CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
| Container Type | Cartridge |
| VOC Content | 4.28 g/L |
| Container Size | 10.14 fl oz |
| Tensile Strength | 13 N/sq mm |
| Chemical Base | Dimethacrylate Ester |
| Product Form | Gel |
| Cure Type | Anaerobic |
| Maximum Gap Fill Size | 0.01 in |
| Minimum Viscosity | 500,000 cps |
| Sensor Safe | No |
| Minimum Operating Temperature | -65 deg F |
| Series | 518 |
| Working Time | 25 min |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Sealant Type | Gasket Sealant |
| Maximum Viscosity | 4,500,000 cps |
| Non-Hardening | Yes |
| Maximum Operating Temperature | 300 deg F |
| Specific Sealing Application | Engine Casing, Gear Boxes |
| Shear Strength | 1,525 psi |
| Full Cure Time | 4 hr |
| For Material Type | Iron, Aluminum, Steel, Cast Iron |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |