Silicone Gasket Maker RTV Gasket Maker, 300 mL, Gray, Temp Range -75 to 625 Degrees F
| Application | Flange Sealing on Transmissions and Cast Metal Housings |
|---|---|
| Color | Gray |
| Size | 300 mL |
| Temp. Range | -75 to 625 deg F |
| Sealant Container | Cartridge |
| Item | RTV Gasket Maker |
| Type | Silicone Gasket Maker |
| Full Cure | 7 days |
| Begins to Harden | 10 min |
| Viscosity | Not Specified |
| Standards | California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
| Characteristics | Good Adhesion to Aluminum, High Performance silicone, Non-Corrosive |
| Specific Gravity | 1.5 @ 20 Degrees C |
| Container Type | Cartridge |
| Flash Point | 199.4 deg F |
| Chemical Base | Oxime Silicone |
| VOC Content | 59.55 g/L |
| Container Size | 10.14 fl oz |
| Tensile Strength | 348 psi |
| Minimum Operating Temperature | -65 deg F |
| Cure Type | Room Temperature |
| Resistance Properties | High-Temperature Resistant, Oil Resistant |
| Series | SI 5999 |
| For Material Type | Metal |
| Working Time | 10 min |
| Features | Non-Corrosive |
| Sensor Safe | No |
| Maximum Gap Fill Size | 1/4 in |
| Sealant Type | Gasket Sealant |
| Full Cure Time | 7 days |
| Maximum Operating Temperature | 550 deg F |
| Specific Sealing Application | Flange Sealing on Transmissions and Cast Metal Housings |
| Hardness | Shore A75 |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Product Form | Paste |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |