Motor, 7.5hp, 1800rpm, 4-Pole, Three Phase, 230/460//190-220/380-415V, 60//50Hz, 213/5TC Frame, TEFC, Wash Down HydroWash NEMA Premium Efficiency White Epoxy Rolled Steel, Footed, C Face, F-1 Mounting, Left Position Terminal Box, IP56

The WEG Hydrowash series was designed for applications where there is a constant need for hygiene and cleanliness of the environment through high pressure water jets and/or chemical products.This is a general purpose, 3 phase wash down duty motor!Washdown motors are applied in food, beverage and pharmaceutical industries.Standard Features:Output: 1/2 up to 25 HPFrames: 56 up to 254/6TNumber of poles: 2 up to 6Certification CSA/ULEfficiency: NEMA Standard and NEMA PremiumVoltage: Frames 56 and 145T - 208-230/460 V with 9 leads Frames 182/4T and 213/5T - 208-230/460//190-220/380-415 V with 9 leads Frames 254/6T - 208-230/460//190-220/380-415 V with 12 leadsService factor: 1.15Mounting: F-1Insulation class “F” (ΔT 80 K)Degree of protection: IP56Shaft material: Stainless Steel (AISI 304)Bearing type: Shielded (2RS)Permatex on joints for frames 182/4T and aboveViton O’Ring on joints for frames 56 and 145TColor: Porcelain White - Munsell N 9.5Coating NOBAC® for frames 180 and aboveInternal painting: Tropicalized (Epoxy for frames 180 and above)Breather on non-drive end shieldVibration: Grade ADrive end bearing seal: Frames 56 and 145T - Oil seal stainless steel spring + slinger (stainless steel) Frames from 182/4T and above - Oil seal stainless steel spring + slinger (stainless steel)Non drive end bearing seal: Frames 56 and 145T - Oil seal stainless steel spring Frames from 182/4T and above - Oil seal stainless steel • Type of grease: Mobil Polyrex EMFan material: plasticAluminum flangesTerminal box material: AluminumExternal screws and key: Stainless Steel