3/4 hp, 1800 rpm, 1 ph, 115/208-230 V, 56C Frame, TENV (Totally Enclosed Non-Ventilated) Enclosure, 60 Hz Mfr description 116351.00,3/4HP,56C,1800RPM,1PH All exterior components are 300-series stainless steel; All sealing components are Viton® for superior chemical resistance End shields are O-ring sealed to the frame; Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors) Double-sealed bearings are pre-lubricated with moisture-resistant high temperature grease for long life Interior coatings applied to rotor and stator protect against corrosion; Ease to clean construction is BISSC Certified for bakery applications Removable hydrophobic breathers in opposite shaft end bell and conduit box equalize pressure without allowing moisture to enter Single-phase motors use Solid State Sinpac® switch – no mechanical switch contacts to corrode and fail. Operational at 115/208-230 V @60HZ. Nameplate image may vary from actual product.
| Power | 0.75 hp |
|---|---|
| Rated Speed | 1,800 rpm |
| Frame Size | 56C |
| Voltage | 115/208-230 V |
| Motor Enclosure Type | Totally Enclosed Non-Ventilated |
| Electrical Phase | Single-Phase |
| Frequency | 60 Hz |
| Shaft Diameter | 5/8″ |
| Ip Rating | IP55 |
| motor category | General Purpose Motor (Stainless Steel) |
| motor phase | 1 ph |
| motor horsepower | 3/4 hp |
| synchronous rpm | 1800 rpm |
| motor supply voltage | 115/208-230 V |
| enclosure type | TENV (Totally Enclosed Non-Ventilated) |
| frequency rating | 60 Hz |
| assembly box mounting | F1 Only |
| thermal protection | None |
| electrical type | Capacitor Start Capacitor Run |
| kva code | K |
| starting method | Across The Line |
| full load efficiency | 0.77 % |
| motor orientation | Horizontal |
| description | General Purpose Motor, 0.75 HP, 1 Ph, 60 Hz, 115/230 V, 1800 RPM, 56C Frame, TENV |
| motor poles | 4-pole |
| volts @ frequency | 115/208-230 @ 60 Hz |
| description keyword | 3/4 hp |
| shaft type | NEMA 56 |
| overall length c dimension | 12.70 in |
| warranty | 1 Year Warranty |
| drive end bearing size | 6205 |
| opposite drive end bearing size | 6203 |
| opposite drive end bearing type | Ball |
| type of bearing | Ball |
| nema design class | N |
| service factor | 1.15 |
| frame material | Rolled Steel |
| insulation class | F |
| harmonization code | 8501.40.4040 |
| weight | 42.00 lbs |
| manufacturer catalog | https://cld.bz/zner21w/I |
| manufacturer catalog number | 116351.00 |
| manufacturer product page | https://www.regalrexnord.com/products/motors/low-voltage-nema-motors/low-voltage-nema-washdown-motors/premium-stainless-motors/1-phase-motors/0-75-hp-washdown-motor-1-phase-1800-rpm-115-208-230-v-56c-frame-tenv-116351-00 |
| manufacturer upc number | 691720307489 |
| technical specifications | http://www.leeson.com/leeson/searchproduct.do?invoke=viewProductDetails&motorNo=116351.00&productType= |
| 2d drawing | http://leebiz.leeson.com/drawingsearchcomponent/drawing.do?invoke=viewDrawingSearchResults&drawingNo=034992-800&vault=C |
| wiring diagram | http://leebiz.leeson.com/drawingsearchcomponent/drawing.do?invoke=viewDrawingSearchResults&drawingNo=005259.03&vault=C |
| mounting type | Round |
| number of speeds | 1 |
| overload protector | No Protection |
| product type | Washdown Duty Motors |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | LEESON (RRX) |
| Vendor SKU | 02868157 |