Induction motors are optimal for uni-directional continuous operation such as a conveyor system.Optimal for uni-directional continuous operationConform to safety standards and global power supply voltages
| Power | 0.00133 hp |
|---|---|
| Rated Speed | 1200 |
| Rated Torque | 0.008 N*m |
| Frame Size | 42 mm |
| Voltage | Single-Phase 110/115 VAC |
| Current | 0.074 A [110 VAC] 0.078 A [115 VAC] |
| Electrical Phase | Single-Phase 100 - 115 VAC |
| Frequency | 60 |
| Shaft Type | Round Shaft (No Gearhead) |
| Shaft Diameter | 5 mm |
| Ip Rating | IP20 |
| product line | Oriental Motor® |
| motor type | Induction |
| frame size(imperial) | 1.65 in |
| output power | 1 W (1/750 HP) |
| voltage (vac) | Single-Phase 110/115 VAC |
| frequency (hz) | 60 |
| shaft/gear type | Round Shaft (No Gearhead) |
| output shaft | Metric |
| output shaft diameter | 5 mm |
| type | Lead Wire |
| rated torque(imperial) | 0.07 lb-in |
| rated speed (rpm) | 1200 |
| permissible overhung load | 10 mm from Shaft End = 40 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 9 lb |
| permissible thrust load | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. |
| rohs compliant | Yes |
| safety standards | UL CSA CCC EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 167ºF (75ºC) or less measured by the resistance change method after rated motor operation with connection to aluminum heat radiation plate (3.15 in. x 3.15 in.) [0.20 in. thickness] |
| insulation class | UL/CSA standards: Class A (221°F [105°C]) EN standards: Class E (248°F [120°C]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% maximum (noncondensing) |
| degree of protection | IP20 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 0IK1A-AW3U |
| Lead Time | Estimated Ship: 10/22/2024 |