75 hp, 3600 rpm, 3 ph, 230/460 V, 365TS Frame, TEFC (Totally Enclosed Fan Cooled) Enclosure, 3555 rpm Base, Foot Mount, Continuous Duty Mfr description XT3752TS 75HP,3555RPM,3PH,60HZ,365TS,A36 Robust cast iron frame construction Compatible with ABB Ability® smart sensor for condition monitoring IP54 ingress protection T-drains to prevent water ingress and allow condensation to drain Laser-etched nameplate for ease in identifying information: 50/60 Hz information listed on nameplate Turndown ratio listed on nameplate Multi-color leads, for ease of connection Suitable for inverter use per NEMA MG1 Part 31.4.4.2 Division 2, Class I, Groups A,B,C,D markings on nameplate Sealed bearings through 250 frame for reduced maintenance.
| Power | 75 hp |
|---|---|
| Rated Speed | 3,600 rpm |
| Frame Size | 365TS |
| Voltage | 0.5 V |
| Mounting Type  | Foot |
| Motor Enclosure Type | Totally Enclosed Fan Cooled |
| Electrical Phase | Three-Phase |
| Shaft Diameter | 1‑7/8″ |
| additional details | You need a motor that performs at its best in even the most extreme conditions, and ABB’s Baldor-Reliance® severe duty XT series delivers. With rugged cast iron frames, condition monitoring capability and the most options right off the shelf, XT series motors give you the reliability you need, when you need it. |
| ambient temperature range | 40C AMB-CONT |
| applications | Chemical, Oil & Gas, Pulp & paper, forest products, Metals & foundries, Cement, aggregate & above ground mining, Food processing, Power generation |
| base rpm | 3555 rpm |
| duty / condition type | Continuous Duty |
| drive end bearing size | 6313 |
| enclosure type | TEFC (Totally Enclosed Fan Cooled) |
| frame material | Cast Iron |
| overall length (c-dimension) | 31.35 in |
| full load amps | 164/81.8 |
| full load efficiency | 93.6 % |
| ip rating | 54 |
| insulation class | F |
| manufacturer upc number | 781568965658 |
| motor category | General Severe Duty Motor |
| motor horsepower | 75 hp |
| motor orientation | Horizontal |
| motor phase | 3 ph |
| motor poles | 2 |
| motor supply voltage | 230/460 V |
| mounting type | Foot |
| nema design class | B |
| opposite drive end bearing size | 6313 |
| opposite drive end bearing type | Ball |
| service factor | 1.15 |
| shaft rotation | REV |
| standards met | NEMA Premium |
| synchronous rpm | 3600 rpm |
| thermal protection | No |
| type of bearing | Ball |
| warranty | 36 Months |
| weight | 1005 lbs |
| product type | Severe Duty Motors |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Baldor |
| Vendor SKU | 11494658 |