Baldor VEM3713T-5 15HP 3500RPM 3PH 60HZ 215TC 3752M TEFC F

ADDITIONAL DESCRIPTION Baldor ID5602-BO Hybrid AC Drive Digital Drive with Analog Interface The ID5602-BO Adjustable Frequency Drive is a variable speed control in a NEMA-4X /IP-65 washdown and watertight enclosure. It is designed to operate 208-230 Volt 3-phase AC induction motors through 6.7 Amps RMS. The sine wave coded Pulse Width Modulated (PWM) output operates at a frequency of 16kHz which provides high motor torque, high efficiency and low noise.On/Off AC Line Switch – P/N: 9482Disconnects the AC line. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity.Forward-Stop-Reverse Switch – P/N: 9480Provides motor reversing and stop functions. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity.Run-Stop-Jog Switch – P/N: 9340Selects speed setting from either the Main Speed Potentiometer or the JOG Trimpot. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity.Signal Isolator – P/N: 9600Provides isolation between a non-isolated signal source and the drive. Mounts on the drive’s PC board with four snap-ins.Auto/Manual Switch – P/N: 9481When used with the Signal Isolator, it selects remote process signal or the Main Speed Potentiometer. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity.AC Line Filter – P/N: 9507(Factory Installed) Provides Class A RFI (EMI) suppression.Liquidtight Fittings - P/N: 9526Provides a liquid-tight seal for wiring the drive. Kit includes necessary liquid-tight fittings*Warning!It is highly recommended that the Signal Isolator (Part No. 9600) be installed when using the drive with external control signals.