EJMM3154T-G 1.5HP, 1755RPM, 3PH, 60HZ, 145JM, 3522M, OPSB
| Power | 1.5 |
|---|---|
| Rated Speed | 1700 - 1800 |
| Frame Size | 145JM |
| Voltage | 230/460 |
| Motor Enclosure Type | Open Protected Slot Band |
| Electrical Phase | Three-Phase |
| Frequency | 60 |
| Shaft Diameter | 7/8″ |
| enclosure | OPSB |
| frame | 145JM |
| frame material | Steel |
| output @ frequency | 1.500 HP @ 60 HZ |
| phase | 3 |
| synchronous speed @ frequency | 1800 RPM @ 60 HZ |
| voltage @ frequency | 460.0 V @ 60 HZ |
| xp class and group | None |
| xp division | Not Applicable |
| agency approvals | CSA |
| ambient temperature | 40 C |
| auxillary box | No Auxillary Box |
| auxillary box lead termination | None |
| base indicator | Rigid |
| bearing grease type | Polyrex EM (-20F +300F) |
| blower | None |
| current @ voltage | 2.200 A @ 460.0 V |
| design code | B |
| drip cover | No Drip Cover |
| duty rating | CONT |
| efficiency @ 100% load | 86.5 % |
| electrically isolated bearing | Not Electrically Isolated |
| feedback device | No Feedback |
| high voltage full load amps | 2.2 a |
| front face code | Standard |
| front shaft indicator | None |
| heater indicator | No Heater |
| insulation class | H |
| inverter code | Inverter Ready |
| kva code | L |
| lifting lugs | No Lifting Lugs |
| locked bearing indicator | Locked Bearing |
| motor lead exit | Ko Box |
| motor lead termination | Flying Leads |
| motor lead quantity/wire size | 9 @ 18 AWG |
| motor type | 3522M |
| mounting arrangement | F1 |
| number of poles | 4 |
| overall length | 13.75 IN |
| power factor | 72 |
| product family | General Purpose |
| pulley end bearing type | Ball |
| pulley face code | C-Face |
| pulley shaft indicator | Tapped & Key |
| rodent screen | Included |
| service factor | 1.15 |
| shaft extension location | Pulley End |
| shaft ground indicator | Shaft Grounding |
| shaft rotation | Reversible |
| shaft slinger indicator | Shaft Slinger |
| speed code | Single Speed |
| motor standards | NEMA |
| starting method | Direct on line |
| thermal device - bearing | None |
| thermal device - winding | None |
| vibration sensor indicator | No Vibration Sensor |
| winding thermal 1 | None |
| winding thermal 2 | None |
| hz | 60 |
| hp | 1.5 |
| rpm | 1700 - 1800 |
| weight | 41.000 lb |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Baldor |
| Vendor SKU | 2210937 |
| Lead Time | 1 day |