EnclosureODPFrame215TCFrame MaterialSteelFrequency60 HzOutput @ Frequency10.000 HP @ 60 HZPhase3Synchronous Speed @ Frequency1800 RPM @ 60 HZVoltage @ Frequency460.0 V @ 60 HZ230.0 V @ 60 HZXP Class and GroupNoneXP DivisionNot ApplicableAgency ApprovalsCSACSA EEVURAmbient Temperature40 CAuxillary BoxNo Auxillary BoxAuxillary Box Lead TerminationNoneBase IndicatorNo MountingBearing Grease TypePolyrex EM (-20F +300F)BlowerNoneCurrent @ Voltage12.500 A @ 460.0 V25.000 A @ 230.0 V26.000 A @ 208.0 VDesign CodeBDrip CoverDrip CoverDuty RatingCONTEfficiency @ 100% Load91.7 %Electrically Isolated BearingNot Electrically IsolatedFeedback DeviceNo FeedbackHigh Voltage Full Load Amps12.5 aFront Face CodeStandardFront Shaft IndicatorNoneHeater IndicatorNo HeaterInsulation ClassFInverter CodeInverter ReadyKVA CodeHLifting LugsStandard Lifting LugsLocked Bearing IndicatorLocked BearingMotor Lead ExitKo BoxMotor Lead TerminationFlying LeadsMotor Lead Quantity/Wire Size9 @ 14 AWGMotor Type3742MMounting ArrangementF1Number of Poles4Overall Length19.75 INPower Factor82Product FamilyGeneral PurposePulley End Bearing TypeBallPulley Face CodeC-FacePulley Shaft IndicatorStandardRodent ScreenNoneRoHS StatusROHS COMPLIANTService Factor1.15Shaft Diameter1.375 INShaft Extension LocationPulley EndShaft Ground IndicatorNo Shaft GroundingShaft RotationReversibleShaft Slinger IndicatorNo SlingerSpeed1770 rpmSpeed CodeSingle SpeedMotor StandardsNEMAStarting MethodDirect on lineThermal Device - BearingNoneThermal Device - WindingNoneVibration Sensor IndicatorNo Vibration SensorWinding Thermal 1NoneWinding Thermal 2None ADDITIONAL DESCRIPTION See all of our
| Power | 10 |
|---|---|
| Rated Speed | 1700 - 1800 |
| Frame Size | 215TC |
| Voltage | 230/460 |
| Motor Enclosure Type | Open Drip Proof |
| Electrical Phase | Three-Phase |
| Frequency | 60 |
| Shaft Diameter | 1‑3/8″ |
| enclosure | ODP |
| frame | 215TC |
| frame material | Steel |
| output @ frequency | 10.000 HP @ 60 HZ |
| phase | 3 |
| synchronous speed @ frequency | 1800 RPM @ 60 HZ |
| voltage @ frequency | 460.0 V @ 60 HZ |
| xp class and group | None |
| xp division | Not Applicable |
| agency approvals | CSA |
| ambient temperature | 40 C |
| auxillary box | No Auxillary Box |
| auxillary box lead termination | None |
| base indicator | No Mounting |
| bearing grease type | Polyrex EM (-20F +300F) |
| blower | None |
| current @ voltage | 12.500 A @ 460.0 V |
| design code | B |
| drip cover | Drip Cover |
| duty rating | CONT |
| efficiency @ 100% load | 91.7 % |
| electrically isolated bearing | Not Electrically Isolated |
| feedback device | No Feedback |
| high voltage full load amps | 12.5 a |
| front face code | Standard |
| front shaft indicator | None |
| heater indicator | No Heater |
| insulation class | F |
| inverter code | Inverter Ready |
| kva code | H |
| lifting lugs | Standard Lifting Lugs |
| locked bearing indicator | Locked Bearing |
| motor lead exit | Ko Box |
| motor lead termination | Flying Leads |
| motor lead quantity/wire size | 9 @ 14 AWG |
| motor type | 3742M |
| mounting arrangement | F1 |
| number of poles | 4 |
| overall length | 19.75 IN |
| power factor | 82 |
| product family | General Purpose |
| pulley end bearing type | Ball |
| pulley face code | C-Face |
| pulley shaft indicator | Standard |
| rodent screen | None |
| rohs status | ROHS COMPLIANT |
| service factor | 1.15 |
| shaft extension location | Pulley End |
| shaft ground indicator | No Shaft Grounding |
| shaft rotation | Reversible |
| shaft slinger indicator | No Slinger |
| speed code | Single Speed |
| motor standards | NEMA |
| starting method | Direct on line |
| thermal device - bearing | None |
| thermal device - winding | None |
| vibration sensor indicator | No Vibration Sensor |
| winding thermal 1 | None |
| winding thermal 2 | None |
| hz | 60 |
| hp | 10 |
| rpm | 1700 - 1800 |
| weight | 132.000 lb |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Baldor |
| Vendor SKU | 2833664 |
| Lead Time | 1 day |