EnclosureOPENFrame56CFrame MaterialSteelFrequency60 HzOutput @ Frequency.750 HP @ 60 HZPhase1Synchronous Speed @ Frequency1800 RPM @ 60 HZVoltage @ Frequency115.0 V @ 60 HZ230.0 V @ 60 HZXP Class and GroupNoneXP DivisionNot ApplicableAgency ApprovalsURCSAAmbient Temperature40 CAuxillary BoxNo Auxillary BoxAuxillary Box Lead TerminationNoneBase IndicatorRigidBearing Grease TypePolyrex EM (-20F +300F)BlowerNoneCurrent @ Voltage3.500 A @ 230.0 V7.000 A @ 115.0 VDesign CodeNDrip CoverNo Drip CoverDuty RatingCONTEfficiency @ 100% Load81.8 %Electrically Isolated BearingNot Electrically IsolatedFeedback DeviceNo FeedbackHigh Voltage Full Load Amps3.5 aFront Face CodeStandardFront Shaft IndicatorNoneHeater IndicatorNo HeaterInsulation ClassFInverter CodeNot InverterKVA CodeMLifting LugsNo Lifting LugsLocked Bearing IndicatorLocked BearingMotor Lead ExitKo BoxMotor Lead TerminationFlying LeadsMotor Lead Quantity/Wire Size6 @ 18 AWGMotor Type3524LCMounting ArrangementF1Number of Poles4Overall Length12.06 INPower Factor90Product FamilyGeneral PurposePulley End Bearing TypeBallPulley Face CodeC-FacePulley Shaft IndicatorStandardRodent ScreenNoneService Factor1.25Shaft Diameter0.625 INShaft Extension LocationPulley EndShaft Ground IndicatorNo Shaft GroundingShaft RotationReversibleShaft Slinger IndicatorNo SlingerSpeed1750 rpmSpeed CodeSingle SpeedMotor StandardsNEMAStarting MethodDirect on lineThermal Device - BearingNoneThermal Device - WindingNoneVibration Sensor IndicatorNo Vibration SensorWinding Thermal 1NoneWinding Thermal 2None ADDITIONAL DESCRIPTION See all of our
| Power | 0.75 |
|---|---|
| Rated Speed | 1700 - 1800 |
| Frame Size | 56C |
| Voltage | 115-230 |
| Motor Enclosure Type | Open |
| Electrical Phase | Single-Phase |
| Frequency | 60 |
| Shaft Diameter | 5/8″ |
| enclosure | OPEN |
| frame | 56C |
| frame material | Steel |
| output @ frequency | .750 HP @ 60 HZ |
| phase | 1 |
| synchronous speed @ frequency | 1800 RPM @ 60 HZ |
| voltage @ frequency | 115.0 V @ 60 HZ |
| xp class and group | None |
| xp division | Not Applicable |
| agency approvals | UR |
| ambient temperature | 40 C |
| auxillary box | No Auxillary Box |
| auxillary box lead termination | None |
| base indicator | Rigid |
| bearing grease type | Polyrex EM (-20F +300F) |
| blower | None |
| current @ voltage | 3.500 A @ 230.0 V |
| design code | N |
| drip cover | No Drip Cover |
| duty rating | CONT |
| efficiency @ 100% load | 81.8 % |
| electrically isolated bearing | Not Electrically Isolated |
| feedback device | No Feedback |
| high voltage full load amps | 3.5 a |
| front face code | Standard |
| front shaft indicator | None |
| heater indicator | No Heater |
| insulation class | F |
| inverter code | Not Inverter |
| kva code | M |
| lifting lugs | No Lifting Lugs |
| locked bearing indicator | Locked Bearing |
| motor lead exit | Ko Box |
| motor lead termination | Flying Leads |
| motor lead quantity/wire size | 6 @ 18 AWG |
| motor type | 3524LC |
| mounting arrangement | F1 |
| number of poles | 4 |
| overall length | 12.06 IN |
| power factor | 90 |
| product family | General Purpose |
| pulley end bearing type | Ball |
| pulley face code | C-Face |
| pulley shaft indicator | Standard |
| rodent screen | None |
| service factor | 1.25 |
| shaft extension location | Pulley End |
| shaft ground indicator | No Shaft Grounding |
| shaft rotation | Reversible |
| shaft slinger indicator | No Slinger |
| speed code | Single Speed |
| motor standards | NEMA |
| starting method | Direct on line |
| thermal device - bearing | None |
| thermal device - winding | None |
| vibration sensor indicator | No Vibration Sensor |
| winding thermal 1 | None |
| winding thermal 2 | None |
| hz | 60 |
| hp | 0.75 |
| rpm | 1700 - 1800 |
| weight | 39.000 lb |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Baldor |
| Vendor SKU | 2840307 |
| Lead Time | 1 day |