EnclosureTENVFrame56CFrame MaterialSteelFrequency60 HzOutput @ Frequency.750 HP @ 60 HZPhase3Synchronous Speed @ Frequency1800 RPM @ 60 HZVoltage @ Frequency460.0 V @ 60 HZ230.0 V @ 60 HZXP Class and GroupNoneXP DivisionNot ApplicableAgency ApprovalsCCSA USCSA EEVURAmbient Temperature40 CAuxillary BoxNo Auxillary BoxAuxillary Box Lead TerminationNoneBase IndicatorRigidBearing Grease TypePolyrex EM (-20F +300F)BlowerNoneConstant Torque Speed Range6Current @ Voltage1.400 A @ 460.0 V2.800 A @ 230.0 VDesign CodeBDrip CoverNo Drip CoverDuty RatingCONTEfficiency @ 100% Load78.5 %Electrically Isolated BearingNot Electrically IsolatedFeedback DeviceNo FeedbackHigh Voltage Full Load Amps1.4 aFront Face CodeStandardFront Shaft IndicatorNoneHeater IndicatorNo HeaterInsulation ClassFInverter CodeInverter DutyKVA CodeMLifting LugsNo Lifting LugsLocked Bearing IndicatorLocked BearingMax Speed2700 rpmMotor Lead ExitKo BoxMotor Lead TerminationRing TerminalsMotor Lead Quantity/Wire Size9 @ 18 AWGMotor Type3514MMounting ArrangementF1Number of Poles4Overall Length11.05 INPower Factor66Product FamilyDirty Duty PlusPulley End Bearing TypeSealed BearingPulley Face CodeC-FacePulley Shaft IndicatorStandardRodent ScreenNoneService Factor1.15Shaft Diameter0.625 INShaft Extension LocationPulley EndShaft Ground IndicatorNo Shaft GroundingShaft RotationReversibleShaft Slinger IndicatorNo SlingerSpeed1750 rpmSpeed CodeSingle SpeedMotor StandardsNEMAStarting MethodDirect on lineThermal Device - BearingNoneThermal Device - WindingNoneVibration Sensor IndicatorNo Vibration SensorWinding Thermal 1NoneWinding Thermal 2None ADDITIONAL DESCRIPTION See all of our
| Power | 0.75 |
|---|---|
| Rated Speed | 2,700 rpm |
| Frame Size | 56C |
| Voltage | 230/460 |
| Motor Enclosure Type | Totally Enclosed Non-Ventilated |
| Electrical Phase | Three-Phase |
| Frequency | 60 |
| Shaft Diameter | 5/8″ |
| enclosure | TENV |
| frame | 56C |
| frame material | Steel |
| output @ frequency | .750 HP @ 60 HZ |
| phase | 3 |
| synchronous speed @ frequency | 1800 RPM @ 60 HZ |
| voltage @ frequency | 460.0 V @ 60 HZ |
| xp class and group | None |
| xp division | Not Applicable |
| agency approvals | CCSA US |
| ambient temperature | 40 C |
| auxillary box | No Auxillary Box |
| auxillary box lead termination | None |
| base indicator | Rigid |
| bearing grease type | Polyrex EM (-20F +300F) |
| blower | None |
| constant torque speed range | 6 |
| current @ voltage | 1.400 A @ 460.0 V |
| design code | B |
| drip cover | No Drip Cover |
| duty rating | CONT |
| efficiency @ 100% load | 78.5 % |
| electrically isolated bearing | Not Electrically Isolated |
| feedback device | No Feedback |
| high voltage full load amps | 1.4 a |
| front face code | Standard |
| front shaft indicator | None |
| heater indicator | No Heater |
| insulation class | F |
| inverter code | Inverter Duty |
| kva code | M |
| lifting lugs | No Lifting Lugs |
| locked bearing indicator | Locked Bearing |
| max speed | 2700 rpm |
| motor lead exit | Ko Box |
| motor lead termination | Ring Terminals |
| motor lead quantity/wire size | 9 @ 18 AWG |
| motor type | 3514M |
| mounting arrangement | F1 |
| number of poles | 4 |
| overall length | 11.05 IN |
| power factor | 66 |
| product family | Dirty Duty Plus |
| pulley end bearing type | Sealed Bearing |
| pulley face code | C-Face |
| pulley shaft indicator | Standard |
| rodent screen | None |
| service factor | 1.15 |
| shaft extension location | Pulley End |
| shaft ground indicator | No Shaft Grounding |
| shaft rotation | Reversible |
| shaft slinger indicator | No Slinger |
| speed code | Single Speed |
| motor standards | NEMA |
| starting method | Direct on line |
| thermal device - bearing | None |
| thermal device - winding | None |
| vibration sensor indicator | No Vibration Sensor |
| winding thermal 1 | None |
| winding thermal 2 | None |
| hz | 60 |
| hp | 0.75 |
| rpm | 1700 - 1800 |
| weight | 30.000 lb |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Baldor |
| Vendor SKU | 2840323 |
| Lead Time | 1 day |