Induction motors are optimal for uni-directional continuous operation such as a conveyor system.Optimal for uni-directional continuous operationConform to safety standards and global power supply voltages
| Power | 0.008 hp |
|---|---|
| Rated Speed | 1200 [200 VAC, 50 Hz] 1500 [60 Hz] |
| Rated Torque | 0.041 N·m [60 Hz] 0.049 N·m [50 Hz] |
| Frame Size | 60 mm |
| Voltage | Three-Phase 200/220/230 VAC |
| Current | 0.072 A [200 VAC, 60 Hz] 0.076 A [220 VAC, 60 Hz] 0.079 A [230 VAC, 60 Hz] 0.081 A [200 VAC, 50 Hz] |
| Electrical Phase | Three-Phase 200/220/230 VAC |
| Frequency | 60 50 |
| Shaft Type | Round Shaft (No Gearhead) |
| Shaft Diameter | 6 mm |
| Ip Rating | IP20 |
| product line | Oriental Motor® |
| motor type | Induction |
| frame size(imperial) | 2.36 in |
| output power | 6 W (1/125 HP) |
| voltage (vac) | Three-Phase 200/220/230 VAC |
| frequency (hz) | 60 50 |
| shaft/gear type | Round Shaft (No Gearhead) |
| output shaft | Metric |
| output shaft diameter | 6 mm |
| type | Lead Wire |
| electromagnetic brake | Not Equipped |
| rated torque(imperial) | 0.36 lb-in [60 Hz] 0.43 lb-in [50 Hz] |
| rated speed (rpm) | 1200 [200 VAC, 50 Hz] 1500 [60 Hz] |
| permissible overhung load | 10 mm from Shaft End = 50 N 20 mm from Shaft End = 110 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 11.2 lb 0.79 in. from Shaft End = 24 lb |
| permissible thrust load | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. |
| rohs compliant | Yes |
| safety standards | UL CSA CCC EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to an aluminum heat radiation plate [4.53 x 4.53 in. (115 x 115 mm), Thickness = 0.2 in. (5 mm) |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
| ambient temperature range | Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing) Other voltage: 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% maximum (noncondensing) |
| degree of protection | IP20 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 2IK6A-SW2 |
| Lead Time | Estimated Ship: 10/22/2024 |