These motors are coupled to an AC electromagnetic brake which is activated when power is not applied. When the power source is turned off, the motor stops instantaneously and holds the load.Power off activated type electromagnetic brakeConforms to safety standards and global power supply voltages
| Power | 0.008 hp |
|---|---|
| Rated Speed | 1200 [200 VAC, 50 Hz] 1500 [60 Hz] |
| Rated Torque | 0.041 N·m [60 Hz] 0.049 N·m [50 Hz] |
| Frame Size | 60 mm |
| Voltage | Three-Phase 200/220/230 VAC |
| Current | 0.072 A [200 VAC, 60 Hz] 0.076 A [220 VAC, 60 Hz] 0.079 A [230 VAC, 60 Hz] 0.081 A [200 VAC, 50 Hz] |
| Electrical Phase | Three-Phase 200/220/230 VAC |
| Frequency | 60 50 |
| Shaft Type | Round Shaft (No Gearhead) |
| Shaft Diameter | 6 mm |
| Ip Rating | IP20 |
| product line | Oriental Motor® |
| motor type | Electromagnetic Brake - Induction |
| frame size(imperial) | 2.36 in |
| output power | 6 W (1/125 HP) |
| voltage (vac) | Three-Phase 200/220/230 VAC |
| frequency (hz) | 60 50 |
| shaft/gear type | Round Shaft (No Gearhead) |
| output shaft | Metric |
| output shaft diameter | 6 mm |
| type | Lead Wire |
| electromagnetic brake | Equipped |
| rated torque(imperial) | 0.3625 lb-in [60 Hz] 0.43125 lb-in [50 Hz] |
| rated speed (rpm) | 1200 [200 VAC, 50 Hz] 1500 [60 Hz] |
| permissible overhung load | 10 mm from Shaft End = 50 N 20 mm from Shaft End = 110 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 11.2 lb 0.79 in. from Shaft End = 24 lb |
| permissible thrust load | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. |
| rohs compliant | Yes |
| safety standards | UL CSA CCC EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to an aluminum heat radiation plate [4.53 x 4.53 in. (115 x 115 mm), Thickness = 0.2 in. (5 mm) |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
| ambient temperature range | Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing) Other voltage: 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% maximum (noncondensing) |
| degree of protection | IP20 |
| voltage (brake) | Single-Phase 200/220/230 VAC |
| current (brake) | 0.02 A |
| input | 3 W |
| static friction torque | 0.03 N·m |
| static friction torque(imperial) | 4.2 oz-in |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 2IK6A-SW2M |
| Lead Time | Estimated Ship: 10/22/2024 |