Torque motors have a high starting torque and torque that decreases as speed increases and varies with the voltage applied to the motor, allowing easy speed control simply by changing the voltage of the power supply.
| Power | 0.004 hp |
|---|---|
| Gear Ratio | 60 |
| Rated Speed | 12.5 [50 Hz] 15 [ 60 Hz] |
| Rated Torque | 13.12 lb-in [60 Hz] 13.61 lb-in [50 Hz] |
| Frame Size | 60 mm |
| Voltage | Single-Phase 220/230 VAC |
| Current | 0.215 A [220 VAC, 60 Hz] 0.22 A [220 VAC, 50 Hz] 0.23 A [230 VAC, 60 Hz] 0.24 A [230 VAC, 50 Hz] |
| Electrical Phase | Single-Phase 220/230 VAC |
| Frequency | 60 50 |
| Shaft Type | Parallel Shaft Gearhead |
| Shaft Diameter | 5/16″ |
| Ip Rating | IP20 |
| product line | Oriental Motor® |
| motor type | Torque |
| frame size(imperial) | 2.36 in |
| output power | 3 W (1/250 HP) |
| voltage (vac) | Single-Phase 220/230 VAC |
| frequency (hz) | 60 50 |
| shaft/gear type | Parallel Shaft Gearhead |
| gear ratio (x:1) | 60 :1 |
| output shaft | Imperial |
| output shaft diameter | 5/16 in. |
| starting torque | 2.77 N·m |
| starting torque(imperial) | 24.5 lb-in |
| torque at max output | 1.5 N·m [60 Hz] 1.54 N·m [50 Hz] |
| torque at max output(imperial) | 13.12 lb-in [60 Hz] 13.61 lb-in [50 Hz] |
| speed at max output (rpm) | 12.5 [50 Hz] 15 [ 60 Hz] |
| permissible overhung load | 10 mm from Shaft End = 120 N 20 mm from Shaft End = 180 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 27 lb 0.79 in. from Shaft End = 40 lb |
| permissible thrust load | 30 N |
| permissible thrust load(imperial) | 6.7 lb |
| rohs compliant | Yes |
| safety standards | UL CSA CCC CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 80ºC (144ºF) or less measured by the resistance change method after rated motor operation under normal ambient temperature and humidity. |
| insulation class | Class B (266°F [130°C]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 194°F ± 27°F (90°C ± 15°C) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% or less (noncondensing) |
| degree of protection | IP20 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 2TK3GN-CW2E / 2GN60SA |
| Lead Time | Oriental Motor's lead time is characterized by best in class, with any of our catalog products available to ship in 3 to 9 business days (for orders placed before 12pm PST). |