Plastic Adhesive, 1099 Series, Tan, 5 oz, Tube
| Item | Plastic Adhesive |
|---|---|
| Type | Best for Nitrile, Medium Viscosity, Fast Dry |
| Application | Bonds Vinyl Extrusions and Sheeting, Fabrics, Foams and Many Plastics |
| Color | Tan |
| Container Size | 5 fl oz |
| Container Type | Tube |
| Materials Bonded | Fabric, Foam, Plastic, Vinyl |
| Begins to Harden | 40 min |
| Chemical Base | Rubber |
| Application Temp. Range | Less Than 230 Degrees F |
| Functional Cure | Not Rated |
| Shear Strength | 1,306 |
| Adhesive Color | Tan |
| Specific Gravity | 0.89 |
| Standards | US Federal Regulations |
| VOC Content Weight | Less than 20 g/L |
| Full Cure Time | 24 hr |
| Working Time | 40 min |
| Primary Applications | Plastics |
| Minimum Viscosity | 2,000 cps |
| Interior/Exterior | Interior Only |
| Maximum Viscosity | 4,000 cps |
| Water Resistance | Water-Resistant |
| Features | Flame Retardant, Fuel Resistant, Low VOC, Oil Resistant, Plasticizer Migration Resistant, Weathering Resistant |
| Series | 1099 |
| Application Method | Brush On On, Roll On, Spray, Pump |
| Low Odor | No |
| Solvent-Free | No |
| VOC Content Weight Percentage | 69% |
| Maximum Performance Temperature | 230 deg F |
| Full Cure | 24 hr |
| Container Size - Adhesives | 5 fl oz |
| Container Type - Adhesives | Tube |
| Green Environmental Attribute | Does Not Contain Methylene Chloride, Meets SCAQMD Requirements |
| Work Life | 40 min |
| Application Family | General Purpose |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |