Induction motors are optimal for uni-directional continuous operation such as a conveyor system.Optimal for uni-directional continuous operationConform to safety standards and global power supply voltages
| Power | 0.03333 hp |
|---|---|
| Gear Ratio | 7.5 |
| Rated Speed | 200 [50 Hz] 240 [60 Hz] |
| Rated Torque | 1 N·m [60 Hz] 1.2 N·m [50 Hz] |
| Frame Size | 80 mm |
| Voltage | Single-Phase 220/230 VAC |
| Current | 0.22 A [220/230 VAC, 60 Hz] 0.24 A [230 VAC, 50 Hz] |
| Electrical Phase | Single-Phase 220/230 VAC |
| Frequency | 60 50 |
| Shaft Type | Parallel Shaft Gearhead |
| Shaft Diameter | 3/8″ |
| Ip Rating | IP20 |
| product line | Oriental Motor® |
| motor type | Induction |
| frame size(imperial) | 3.15 in |
| output power | 25 W (1/30 HP) |
| voltage (vac) | Single-Phase 220/230 VAC |
| frequency (hz) | 60 50 |
| shaft/gear type | Parallel Shaft Gearhead |
| gear ratio (x:1) | 7.5 :1 |
| output shaft | Imperial |
| output shaft diameter | 3/8 in. |
| type | Conduit Box |
| rated torque(imperial) | 10.6 lb-in [50 Hz] 8.8 lb-in [60 Hz] |
| rated speed (rpm) | 200 [50 Hz] 240 [60 Hz] |
| permissible load inertia | 17.4375 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 95.63 oz-in² |
| permissible overhung load | 10 mm from Shaft End = 100 N 20 mm from Shaft End = 150 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 22 lb 0.79 in. from Shaft End = 33 lb |
| permissible thrust load | 50 N |
| permissible thrust load(imperial) | 11.20 lb |
| rohs compliant | Yes |
| safety standards | UL CSA EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 144ºF (80ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead. |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266ºF ± 9ºF (130ºC ± 5ºC) close: 179.6ºF ± 27ºF (82ºC ± 15ºC) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% maximum (noncondensing) |
| degree of protection | IP20 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 4IK25GN-ECH / 4GN7.5SA |
| Lead Time | Oriental Motor's lead time is characterized by best in class, with any of our catalog products available to ship in 3 to 9 business days (for orders placed before 12pm PST). |