Induction motors are optimal for uni-directional continuous operation such as a conveyor system.Optimal for uni-directional continuous operationConform to safety standards and global power supply voltages
| Power | 0.03333 hp |
|---|---|
| Rated Speed | 100 [200 VAC, 50 Hz] 120 [60 Hz] |
| Rated Torque | 1.4 N·m 1.4 N·m |
| Frame Size | 80 mm |
| Voltage | Three-Phase 200/220/230 VAC |
| Current | 0.21 A [200/220 VAC, 60 Hz] 0.22 A [230 VAC, 60 Hz] 0.23 A [200 VAC, 50 Hz] |
| Electrical Phase | Three-Phase 200/220/230 VAC |
| Frequency | 60 50 |
| Shaft Type | Right-Angle Hollow Shaft Gearhead |
| Shaft Diameter | 15 mm |
| Ip Rating | IP20 |
| Gear Ratio | 15 |
| product line | Oriental Motor® |
| motor type | Induction |
| frame size(imperial) | 3.15 in |
| output power | 25 W (1/30 HP) |
| voltage (vac) | Three-Phase 200/220/230 VAC |
| frequency (hz) | 60 50 |
| shaft/gear type | Right-Angle Hollow Shaft Gearhead |
| gear ratio (x:1) | 15 :1 |
| output shaft | Metric |
| output shaft diameter | 15 mm |
| type | Conduit Box |
| electromagnetic brake | Not Equipped |
| rated torque(imperial) | 12 lb-in 12 lb-in |
| rated speed (rpm) | 100 [200 VAC, 50 Hz] 120 [60 Hz] |
| permissible load inertia | 69.75 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 382.50 oz-in² |
| permissible overhung load | 10 mm from gearhead mounting surface = 250 N 20 mm from gearhead mounting surface = 220 N |
| permissible overhung load(imperial) | 0.39 in. from gearhead mounting surface = 56 lb 0.79 in. from gearhead mounting surface = 49 lb |
| permissible thrust load | 100 N |
| permissible thrust load(imperial) | 22 lb |
| rohs compliant | Yes |
| safety standards | UL CSA EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead. |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
| ambient temperature range | Three-phase 200 VAC: 32ºF ~ 122ºF (0ºC ~ 50ºC) (nonfreezing) Other voltage: 32ºF ~ 104ºF (0ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% maximum (noncondensing) |
| degree of protection | IP20 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 4IK25GN-SH / 4GN15RH |
| Lead Time | Estimated Ship: 10/29/2024 |