The ATV212H075N4 is a variable speed AC Drive with heat sink. This drive is for 3-phase 0.75kW asynchronous motors. It is specifically intended for the most commonly encountered fluid management applications. Due to its eco-energy based design, energy savings of up to 70% can be achieved compared to a traditional control system. This commercialized drive comes with an adjustable PI regulator. The electrical isolation is between power and control. RTU Transmission frame IEC 61800-5-1 Pollution degree 12kHz Switching frequency ±15% Torque accuracy 1 LED - red - DC bus energized local signalling By DC injection Braking to standstill 5092VDC Between control and power terminals dielectric strength 3535VDC Between earth and power terminals dielectric strength ≥1MΩ at 500VDC for 1 minute Insulation resistance 2-wire RS485 Physical interface 51dB conforming to 86/188/EEC Noise level Applications Industrial, Motor Drive & Control, Automation & Process Control
| Input Power | 18.5 kW |
|---|---|
| Input Voltage | 380 V AC |
| Current Rating | 24.2 A |
| Series | Altivar 212 |
| Compatibility | Induction/Asynchronous Motors |
| supply voltage min | 200VAC |
| power rating | 750W |
| supply voltage max | 240VAC |
| output current max | 2.2A |
| ip rating | IP21 |
| control / drive type | Variable Speed Drive |
| compatible motor type | Induction / Asynchronous Motors |
| no. of phases | Three Phase |
| supply frequency | 50Hz / 60Hz |
| product range | Altivar 212 Series |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Schneider Electric |
| Vendor SKU | 52T3454 |
| Lead Time | Most orders of US in-stock items will ship either the same day or next business day. |