Induction motors are optimal for uni-directional continuous operation such as a conveyor system.Optimal for uni-directional continuous operationConform to safety standards and global power supply voltages
| Power | 40 W (1/19 HP) |
|---|---|
| Rated Speed | 1500 |
| Rated Torque | 0.26 N*m |
| Frame Size | 90 mm |
| Voltage | Single-Phase 110/115 VAC |
| Current | 0.67 A [115 VAC] 0.68 A [110 VAC] |
| Electrical Phase | Single-Phase 100 - 115 VAC |
| Frequency | 60 |
| Shaft Type | Round Shaft (No Gearhead) |
| Shaft Diameter | 10 mm |
| Ip Rating | IP54 (Excluding the Installation Surface of the Round Shaft Type) |
| product line | Oriental Motor® |
| motor type | Induction |
| frame size(imperial) | 3.54 in |
| output power | 40 W (1/19 HP) |
| voltage (vac) | Single-Phase 110/115 VAC |
| frequency (hz) | 60 |
| shaft/gear type | Round Shaft (No Gearhead) |
| output shaft | Metric |
| output shaft diameter | 10 mm |
| type | Terminal Box |
| electromagnetic brake | Not Equipped |
| rated torque(imperial) | 2.25 lb-in |
| rated speed (rpm) | 1500 |
| permissible overhung load | 10 mm from Shaft End = 140 N 20 mm from Shaft End = 200 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 31 lb 0.79 in. from Shaft End = 45 lb |
| permissible thrust load | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. |
| rohs compliant | Yes |
| safety standards | UL CSA CCC EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 144ºF (80ºC) or less measured by the resistance change method after rated motor operation with connection to aluminum heat radiation plate (6.5 in. x 6.5 in.) [0.20 in. thickness] |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% maximum (noncondensing) |
| degree of protection | IP54 (excluding the installation surface of the round shaft type) |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 5IK40A-AW2TU |
| Lead Time | Estimated Ship: 10/22/2024 |