Induction motors are optimal for uni-directional continuous operation such as a conveyor system.Optimal for uni-directional continuous operationConform to safety standards and global power supply voltages
| Power | 40 W (1/19 HP) |
|---|---|
| Gear Ratio | 3 |
| Rated Speed | 500 [50 Hz] 600 [60 Hz] |
| Rated Torque | 0.63 N·m [60 Hz] 0.73 N·m [50 Hz] |
| Frame Size | 90 mm |
| Voltage | Single-Phase 220/230 VAC |
| Current | 0.34 A [230 VAC, 60 Hz] 0.35 A [220 VAC, 60 Hz] 0.39 A [230 VAC, 50 Hz] |
| Electrical Phase | Single-Phase 220/230 VAC |
| Frequency | 60 50 |
| Shaft Type | Parallel Shaft Gearhead |
| Shaft Diameter | 1/2″ |
| Ip Rating | IP20 |
| product line | Oriental Motor® |
| motor type | Induction |
| frame size(imperial) | 3.54 in |
| output power | 40 W (1/19 HP) |
| voltage (vac) | Single-Phase 220/230 VAC |
| frequency (hz) | 60 50 |
| shaft/gear type | Parallel Shaft Gearhead |
| gear ratio (x:1) | 3 :1 |
| output shaft | Imperial |
| output shaft diameter | 1/2 in. |
| type | Conduit Box |
| rated torque(imperial) | 5.5 lb-in [60 Hz] 6.4 lb-in [50 Hz] |
| rated speed (rpm) | 500 [50 Hz] 600 [60 Hz] |
| permissible load inertia | 6.75 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 36.90 oz-in² |
| permissible overhung load | 10 mm from Shaft End = 250 N 20 mm from Shaft End = 350 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 56 lb 0.79 in. from Shaft End = 78 lb |
| permissible thrust load | 100 N |
| permissible thrust load(imperial) | 22 lb |
| rohs compliant | Yes |
| safety standards | UL CSA EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 144ºF (80ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead. |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266ºF ± 9ºF (130ºC ± 5ºC) close: 179.6ºF ± 27ºF (82ºC ± 15ºC) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% maximum (noncondensing) |
| degree of protection | IP20 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 5IK40GN-ECH / 5GN3SA |
| Lead Time | Oriental Motor's lead time is characterized by best in class, with any of our catalog products available to ship in 3 to 9 business days (for orders placed before 12pm PST). |