Perfect for high-speed appications.Optimal for uni-directional continuous operationConform to safety standards and global power supply voltagesShaft Diameter is 0.3937 inch (10 mm)
| Power | 60 W (1/12 HP) |
|---|---|
| Rated Speed | 3200 |
| Rated Torque | 0.185 N*m |
| Frame Size | 90 mm |
| Voltage | Single-Phase 110/115 VAC |
| Current | 0.93 A [115 VAC] 0.94 A [110 VAC] |
| Electrical Phase | Single-Phase 100 - 115 VAC |
| Frequency | 60 |
| Shaft Type | Round Shaft (No Gearhead) |
| Shaft Diameter | 10 mm |
| Ip Rating | IP20 |
| product line | Oriental Motor® |
| frame size(imperial) | 3.54 in |
| output power | 60 W (1/12 HP) |
| voltage (vac) | Single-Phase 110/115 VAC |
| frequency (hz) | 60 |
| shaft/gear type | Round Shaft (No Gearhead) |
| output shaft | Metric |
| output shaft diameter | 10 mm |
| type | Lead Wire |
| electromagnetic brake | Not Equipped |
| rated torque(imperial) | 1.63 lb-in |
| rated speed (rpm) | 3200 |
| permissible overhung load | 10 mm from Shaft End = 240 N 20 mm from Shaft End = 270 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 54 lb 0.79 in. from Shaft End = 60 lb |
| permissible thrust load | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. |
| rohs compliant | Yes |
| safety standards | UL CSA CCC EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 144ºF (75ºC) or less measured by the resistance change method after rated motor operation with connection to aluminum heat radiation plate (6.5 in. x 6.5 in.) [0.20 in. thickness] |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% maximum (noncondensing) |
| degree of protection | IP20 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 5IK60A-BW2U |
| Lead Time | Estimated Ship: 10/29/2024 |