Induction motors are optimal for uni-directional continuous operation such as a conveyor system.Optimal for uni-directional continuous operationConform to safety standards and global power supply voltagesGearhead Required
| Power | 60 W (1/12 HP) |
|---|---|
| Rated Speed | 500 [50 Hz] 600 [60 Hz] |
| Rated Torque | 0.61 N*m |
| Frame Size | 90 mm |
| Voltage | Single-Phase 220/230 VAC |
| Current | 0.54 A [220/230 VAC, 60 Hz] 0.57 A [230 VAC, 50 HZ] |
| Electrical Phase | Single-Phase 220/230 VAC |
| Frequency | 60 50 |
| Shaft Type | Right-Angle Hollow Shaft Gearhead |
| Shaft Diameter | 17 mm |
| Ip Rating | IP54 |
| Gear Ratio | 3 |
| product line | Oriental Motor® |
| motor type | Induction |
| frame size(imperial) | 3.54 in |
| output power | 60 W (1/12 HP) |
| voltage (vac) | Single-Phase 220/230 VAC |
| frequency (hz) | 60 50 |
| shaft/gear type | Right-Angle Hollow Shaft Gearhead |
| gear ratio (x:1) | 3 :1 |
| output shaft | Metric |
| output shaft diameter | 17 mm |
| type | Conduit Box |
| electromagnetic brake | Not Equipped |
| rated torque(imperial) | 5.3 lb-in |
| rated speed (rpm) | 500 [50 Hz] 600 [60 Hz] |
| permissible load inertia | 9.9 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 54 oz-in² |
| permissible overhung load | 10 mm from gearhead mounting surface = 560 N 20 mm from gearhead mounting surface = 500 N |
| permissible overhung load(imperial) | 0.39 in. from gearhead mounting surface = 126 lb 0.79 in. from gearhead mounting surface = 112 lb |
| permissible thrust load | 250 N |
| permissible thrust load(imperial) | 56 lb |
| rohs compliant | Yes |
| safety standards | UL CSA EN CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 144ºF (80ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead. |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
| ambient temperature range | 32ºF ~ 104ºF (0ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% maximum (noncondensing) |
| degree of protection | IP54 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 5IK60GE-ECH / 5GE3RH |
| Lead Time | Estimated Ship: 10/29/2024 |