Torque motors have a high starting torque and torque that decreases as speed increases and varies with the voltage applied to the motor, allowing easy speed control simply by changing the voltage of the power supply.Shaft diameter is 0.3937 in (10mm)
| Power | 20 W (1/38 HP) |
|---|---|
| Rated Speed | 900 |
| Rated Torque | 0.25 N*m |
| Frame Size | 90 mm |
| Voltage | Single-Phase 110/115 VAC |
| Current | 1.00 A [110 VAC] 1.02 A [115 VAC] |
| Electrical Phase | Single-Phase 100 - 115 VAC |
| Frequency | 60 |
| Shaft Type | Round Shaft (No Gearhead) |
| Shaft Diameter | 10 mm |
| product line | Oriental Motor® |
| motor type | Torque |
| frame size(imperial) | 3.54 in |
| output power | 20 W (1/38 HP) |
| voltage (vac) | Single-Phase 110/115 VAC |
| frequency (hz) | 60 |
| shaft/gear type | Round Shaft (No Gearhead) |
| output shaft | Metric |
| output shaft diameter | 10 mm |
| starting torque | 0.35 N·m |
| starting torque(imperial) | 3.0625 lb-in |
| torque at max output | 0.25 N·m |
| torque at max output(imperial) | 2.1875 lb-in |
| speed at max output (rpm) | 900 |
| permissible overhung load | 10 mm from Shaft End = 140 N 20 mm from Shaft End = 200 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 31 lb 0.79 in. from Shaft End = 45 lb |
| permissible thrust load | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. |
| rohs compliant | Yes |
| safety standards | UL CSA CCC CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 80ºC (144ºF) or less measured by the resistance change method after rated motor operation, with connecting heat radiation plate (6.5 in. x 6.5 in. aluminum plate (0.20 in. thick)) |
| insulation class | Class B (266°F [130°C]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% or less (noncondensing) |
| degree of protection | IP20 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 5TK20A-AW2U |
| Lead Time | Estimated Ship: 10/29/2024 |