The next generation KIIS Series offers an optimally designed, high efficiency next generation three-phase motor that incorporates higher strength hypoid gears that maximizes the motor performance.Higher Permissible TorqueLong Life (Rated life 10,000 hours)Low NoiseCombination Type (motor and gearhead come pre-assembled)Meets IE4 Standards
| Power | 200 W (1/4 HP) |
|---|---|
| Rated Speed | 1420 r/min [50 Hz] 1700 r/min [60 Hz] |
| Rated Torque | 1.35 N·m [50 Hz] 1.13 N·m [60 Hz] |
| Frame Size | 110 mm |
| Voltage | Three-Phase 380/400/415 VAC |
| Current | 0.56 A [380/400 VAC, 50 Hz] 0.52 A [380 VAC, 60 Hz] 0.51 A [400 VAC, 60 Hz] 0.57 A [415 VAC, 50 Hz] |
| Electrical Phase | Three-Phase 380/400/415 VAC |
| Frequency | 60 50 |
| Shaft Type | Round Shaft (No Gearhead) |
| Shaft Diameter | 14 mm |
| Ip Rating | IP66 |
| product line | Oriental Motor® |
| motor type | Induction |
| frame size(imperial) | 4.33 in |
| output power | 200 W (1/4 HP) |
| voltage (vac) | Three-Phase 380/400/415 VAC |
| frequency (hz) | 60 50 |
| type | Terminal Box |
| electromagnetic brake | Not Equipped |
| shaft/gear type | Round Shaft (No Gearhead) |
| output shaft diameter | 14 mm |
| rated torque(imperial) | 10 lb-in [60 Hz] 11.94 lb-in [50 Hz] |
| rated speed (rpm) | 1420 r/min [50 Hz] 1700 r/min [60 Hz] |
| permissible overhung load | 10 mm from Shaft End = 320 N 20 mm from Shaft End = 350 N |
| permissible overhung load(imperial) | 0.79 in. from Shaft End = 79 lb 0.39 in. from Shaft End = 72 lb |
| permissible thrust load | 30 N |
| permissible thrust load(imperial) | 6.7 lb |
| rohs compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| safety standards | UL CCC CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of the windings is 144ºF (80ºC) or less measured by the resistance change method after rated load continuous operation under normal ambient temperature and humidity. |
| thermal class | 130 (B) |
| ambient temperature range | 0ºC ~ 40ºC (32ºF ~140ºF) (nonfreezing) |
| ambient humidity | 85% or less (noncondensing) |
| degree of protection | IP66 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | 7IK200VAS-EU3T2 |
| Lead Time | Estimated Ship: 10/29/2024 |