BD Torque200F.L. Amps145Frame TypeNEWTMult. Sym.M12Notes1,3,6Weight1432 lbs ADDITIONAL DESCRIPTION SpecificationsDescriptionMeets or exceeds NEMA Premium Efficiency Requirements defined by NEMA MG-1,Table 12-12Class I, Div II Groups ABCD, T2B Suitable for wye-delta start on 213T frame and aboveDual voltage ratings suitable for part wind start on lower voltageSingle voltage ratings suitable for part wind start at 460V are noted 1.15Service Factor @ 60 hertz; 1.0Service Factor @ 50 hertzSuitable for 575V @ 1.0Service Factor Inverter Duty (20:1 variable torque; 10:1 constant torque)Vacuum Pressure Impregnation for all windingsSealed bearings thru 215T frame Mechanical “V” Seal on drive endClass F insulation system, class B rise at full load 40° C ambient continuous dutyCorrosion resistant paintGreasable bearings 254T frame and above Stainless steel nameplate and zinc plated hardware F1/F2 reversibleFeet are dual drilled on most frames for mounting flexibilityCast iron frame construction including the conduit boxC-Flange and D-Flange field conversion kits availableLifting provisions on 143T frameCondensation drains with plastic plugsIP55 Protection – Terminal box is sealed for IP66 protection CSA + C + US CertificationISO 9001 Certification
| Power | 125 |
|---|---|
| Rated Speed | 1700 - 1800 |
| Frame Size | 444T |
| Voltage | 460 |
| Motor Enclosure Type | Totally Enclosed Fan Cooled |
| Electrical Phase | Three-Phase |
| Frequency | 60 |
| bd torque | 200 |
| f.l. amps | 145 |
| frame type | NEWT |
| mult. sym. | M12 |
| notes | 1,3,6 |
| weight | 1432 lbs |
| hz | 60 |
| frame | 444T |
| hp | 125 |
| phase | 3 |
| rpm | 1700 - 1800 |
| enclosure | TEFC |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | NAE |
| Vendor SKU | 818532 |
| Lead Time | 1 day |