The Ubiquiti UniFi Enterprise Campus 48 PoE switch is designed to meet the demands of enterprise networks, delivering performance and capacity. With a switching capacity of 920 Gbps and a forwarding rate of 684 Mpps, this switch handles heavy traffic while maintaining a reliable connection. It features advanced Layer 3 capabilities and supports Power over Ethernet (PoE) Class 4, making it suitable for powering devices such as IP cameras and access points directly through the network cable.Equipped with a user-friendly 1.3" LCM touch screen display, the switch enables easy monitoring and management. With 48 ports supporting speeds up to 25G, along with built-in redundancy and security features such as MAC and IP-based ACLs support, IGMP snooping, and DHCP guardian, this switch ensures a reliable and secure networking experience. The Ubiquiti UniFi Enterprise Campus 48 PoE switch operates in temperatures ranging from -5°C to 40°C and humidity levels of 10% to 90%.
| Switch Type | 10 Gigabit Ethernet/25 Gigabit Ethernet |
|---|---|
| Number Of Ports | 48 |
| Mounting Type | Rack |
| Supply Voltage | AC 100-240 volt |
| brand | Ubiquiti |
| product line | Ubiquiti UniFi Enterprise Campus |
| model | 48 PoE |
| manufacturer | Ubiquiti |
| advanced switching | Layer 3 |
| features | 19KV ESD Protector (contact discharge), 30KV ESD Protector (air-gap discharge), 802.1x authentication, Advanced IGMP configuration, Device isolation with ACLs, DHCP guardian, DHCP relay, DHCP snooping, Egress rate limit, Etherlighting ports, Flow control, IGMP snooping, Inter-VLAN Routing, Jumbo Frames support, Link Aggregation Control Protocol (LACP), LLDP-MED, Loop protection, MAC and IP-based ACLs support, MAC based port restriction, Port isolation, Port mirroring, Reset button, SGCC steel housing, Standard mode, Static routing, Voice VLAN |
| form factor (hubs & switches) | Rack-mountable |
| jumbo frame support | Yes |
| mac address table size | 128K entries |
| manageable | Yes |
| poe budget | 2150 watt |
| ports | 48 |
| power over ethernet (poe) | PoE Class 4 |
| product type | Switch |
| routing protocol | RSTP, STP |
| subcategory | Network hubs and switches |
| switching type | 10 Gigabit Ethernet / 25 Gigabit Ethernet |
| qsfp slots | 25 Gigabit SFP28 |
| interface provided | 16 x 10/100/1000/2.5G RJ-45 PoE Class 4 - 90 W, 32 x 10/100/1000/2.5G/5G/10GBase-T RJ-45 PoE Class 4 - 90 W, 4 x 1/10/25Gbit LAN SFP28 |
| port quantity | 16 |
| port type | 2.5GBase-T |
| ports type (2nd) | 10Gb Ethernet |
| frequency | 50/60 hertz |
| hot-plug | Hot-plug |
| power provided | 950 watt |
| power supplies installed | 2 |
| redundant power supply | Yes |
| redundant power supply supported | 1+1 |
| required voltage | AC 100-240 volt |
| built-in devices | 1.3" LCM touch screen display, 4 hot-swap fans |
| max operating temperature | 104 degree Fahrenheit |
| min operating temperature | 23 degree Fahrenheit |
| operating humidity | 10 - 90% (non-condensing) |
| capacity | ARP entries: 128000, IPv4 routes (static): 256000, Packet buffer size: 8 MB, Virtual interfaces (VLANs): 1000 |
| device type | Internal power supply |
| packaged quantity | 1 |
| performance | Forwarding rate: 684 Mpps, Non-blocking switching throughput: 460 Gbps, Switching capacity: 920 Gbps |
| ports (2nd) quantity | 32 |
| ports (3rd) quantity | 4 |
| rack mounting kit | Included |
| height | 1.7 inch |
| height (rack units) | 1 |
| weight | 20.86 lbs |
| width | 17.4 inch |
| depth | 19.5 inch |
| color category | Silver |
| compliant standards | ESD, FCC, IC |
| energy star certified | No |
| epeat compliant | No |
| tco certified | No |
| compatibility specs | P/N: UACC-AOC-SFP28-5M, UACC-FAN-F2B-4020, UACC-OM-SFP28-SR |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Ubiquiti |
| Vendor SKU | 8419647 |