Variable Speed Drive, Altivar Process 630 Series, Embedded, Three Phase, 75 kW, 380 to 480 Vac

The ATV630D75N4 from Schneider Electric is an Altivar process ATV600 series forced convection wall mount variable speed drive. This variable speed drive with embedded services dedicated to process industry and utilities for 3 phases synchronous, asynchronous and special motors. It has certifications such as ATEX zone 2/22, DNV-GL, ATEX INERIS, TUV, CSA and UL. It follows IEC 61000-3-12, EN/IEC 61800-3 environment 2 category C3, IEC 61508, IEC 60721-3, UL 508C, IEC 13849-1, EN/IEC 61800-3 environment 1 category C2, EN/IEC 61800-3, EN/IEC 61800-5-1 standards. It has line current of 98.9A at 380V (heavy duty), 112.7A at 480V (normal duty), 131.3A at 380V (normal duty)and 86.9A at 480V (heavy duty). It also has 55KW (heavy duty) 75KW (normal duty) motor power in KW and 100hp (normal duty) 75hp (heavy duty) in motor power hp. Rated supply voltage range from 380VAC to 480VAC 50Hz to 60Hz supply, 0.0001KHz to 0.5KHz output and 2.5KHz nominal switching frequency IP21 conforms IEC 61800-5-1, IEC 60529 Ethernet, Modbus serial and Modbus TCP communication port protocol 16 preset speeds discrete input logic 3/2 analogue input/output number, 8 discrete input number and 3 relay output number Dimension is 290mm x 922mm x 323mm (W x H x D), vertical +/- 10 degree operating position Ambient air temperature for operation range from 50°C to 60°C with derating factor Applications Motor Drive & Control