Silarius SIL-A8POE1G120 12 Ports POE+ switch with 8 Gigabit Ports PoE+, 2 Gigabit Uplinks, 2 SFP Slots Uplink, and POE indicator - 120W POE+

The SIL-A8POE1G120, is a 12-port Gigabit PoE+ Switch, offering 8 x 10/100/1000 BASE-T PoE ports with 2 Gigabit Ethernet and 2 SFP Slots Uplink (Not Combo! ). It supports DIP Switch mode with Vlan features and video data extend max 250m, full compliant working with PoE ( 802.3 af) and PoE+ ( 802.3 at) devices with a 120W PoE budget, delivering data and power over existing Ethernet cables to PoE devices such as Access points, VoIP phones, and IP Cameras. Unique ground potentials protection and fanless design, Integrates smart power-chip to accurately calculate PoE power consumption, with digital tube display, the total PoE power output clear at a glance, when the total power output of all PoE port exceeds the max PoE power budget, the PoE Port Priority disconnected the low priority port power supply, ensure powering the critical PD equipment, to prolong the service life of the switches. Plug and play this sturdy metal switch for reliable high speed PoE networking, making this PoE switch a very good choice for IP cameras, wireless AP, VoIP users. Highlights: 8 x 10/100/1000BASE-T PoE ports with 2 Gigabit Ethernet and 2 SFP Slots 120W PoE Power Budget Digital display shows total PoE power consumption, clear at a glance Automatic defect the stuck IP Cameras and Reboot IPC (other PDs) Support short-circuit protection and Over-current protection PoE Port Priority to protect switches in over-loading status Support DIP mode in Switch, Normal, Vlan and Video Extend: Switch mode, It can be used as normal Switch features Vlan mode, Isolate each poe port 1-8, effectively improve network performance Video Extend mode, data & power distance up to Max 250m Specs: Switch Name: 12-Port Gigabit Ethernet PoE+ Switch Model No. SIL-A8POE1G120 Standards IEEE 802.3 i 10BASE-T IEEE 802.3 u 100BASE-TX IEEE 802.3 ab 100BASE-T IEEE 802.3 x Flow Control IEEE 802.3 az EEE IEEE 802.3 af Power over Ethernet IEEE 802.3 at Power over Ethernet Port Interface 1-8 port: 10/100/1000Mbps PoE+ Port 9-10 port: Gigabit Ethernet Port 11-12 port: Gigabit SFP Slots PoE Power Budget 120 Watt Switching Bandwidth 24 Gbps Forwarding rate 17.85 Mpps (64-byte packet size) Jumbo Frame 9K bytes MAC Address Table 8k entries Transmission IEEE 802.3 x full-duplex flow control and Backpressure half-duplex LED Indicators Power (power indicator) Link/Act (link/activity indicator) Special Features Digital display PoE power consumption Metal enclosure with Fanless design Ground potentials Protection design Power Supply AC100~240V, 50/60Hz Cables UTP cat 5 or above Warranty 3 Years Net Weight 1.951 kg Dimensions 282mm (L) * 178mm (W) * 44mm (H) Environment specification Operating temperature: -10~45, Operating humidity: 10%~90% Storage temperature: -20~70, Storage humidity: 5%~95%