Pipe Thread Sealant 9.6 fl oz, Brush-Top Can, TFE, Off-White, Paste
| Item | Pipe Thread Sealant |
|---|---|
| Container Size | 9.6 fl oz |
| Container Type | Brush-Top Can |
| Color | Off-White |
| Chemical Base | PTFE |
| Series | TFE |
| Product Form | Paste |
| Resistance Properties | High-Temperature Resistant, Lubricating, Non-Corrosive, Non-Drip |
| Begins to Harden | Immediate |
| Liquid Pressure Range | 10,000 psi |
| Size | 8 oz |
| Viscosity | 1,600,000-1,800,000cps |
| Standards | NSF #128341, UL Listed |
| Gas Pressure Range | 2,000 psi |
| For Use With | All Pipe and threaded connections made of cast iron, malleable brass, copper, and stainless steel. Designed for use by all pipe fitters, fabricators, plumbers, and mechanical contractor |
| Flash Point | 350 deg F |
| Specific Gravity | 1.48 |
| Full Cure | 30 min |
| Application | Recommended for potable water, steam, LP and natural gas, refrigerants, solvents, caustics, dilute acids, oils, and diesel fuel. |
| Performance Temp. Range | -250 to 500 deg F |
| Application Temp. Range | -250 to 500 deg F |
| Chemical Type | PTFE |
| VOC Content Weight Percentage | 0.1% |
| For Fluid Type | Fuels, LP Gas, Oil, Steam, Water |
| For Material Type | Copper, Brass, Stainless Steel, Cast Iron |
| Shelf Life | 5 yr |
| Minimum Application Temperature | -250 deg F |
| Minimum Operating Temperature | -50 deg F |
| Application Method | Brush |
| Maximum Operating Pressure for Gases | 2,000 psi |
| Features | Solvent Free |
| Cure Type | Non-Hardening |
| Maximum Operating Temperature | 500 deg F |
| For Maximum Thread Diameter | 2 in |
| Full Cure Time | 30 min |
| Maximum Viscosity | 1,800,000 cps |
| Maximum Application Temperature | 500 deg F |
| Minimum Viscosity | 1,600,000 cps |
| Maximum Operating Pressure for Liquids | 10,000 psi |
| Non-Toxic | Yes |
| Clean Up Method | Mineral Spirits |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |