Induction motors are optimal for uni-directional continuous operation such as a conveyor system.The smallest frame size (4.09 inch [104 mm]) in the 1/3.73 HP (200 W) output classHypoid gear-employed, right-angle gearheadsApproved under typical international safety standards; bears the CE markingCombination type, with the motor and the gearhead coming pre-assembled
| Power | 200 W (1/4 HP) |
|---|---|
| Rated Speed | 100 [50 Hz] 120 [60 Hz] |
| Rated Torque | 13.9 N·m [60 Hz] 16.6 N·m [50 Hz] |
| Frame Size | 104 mm |
| Voltage | Single-Phase 220/230 VAC |
| Current | 1.5 A |
| Electrical Phase | Single-Phase 220/230 VAC |
| Frequency | 60 50 |
| Shaft Type | Right-Angle Hollow Shaft Gearhead |
| Shaft Diameter | 25 mm |
| Ip Rating | IP40 |
| Gear Ratio | 15 |
| product line | Oriental Motor® |
| motor type | Induction |
| frame size(imperial) | 4.09 in |
| output power | 200 W (1/4 HP) |
| voltage (vac) | Single-Phase 220/230 VAC |
| frequency (hz) | 60 50 |
| shaft/gear type | Right-Angle Hollow Shaft Gearhead |
| gear ratio (x:1) | 15 :1 |
| output shaft diameter | 25 mm |
| electromagnetic brake | Not Equipped |
| rated torque(imperial) | 123 lb-in [60 Hz] 146 lb-in [50 Hz] |
| rated speed (rpm) | 100 [50 Hz] 120 [60 Hz] |
| permissible load inertia | 450 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 2453 oz-in² |
| permissible overhung load | 10 mm from gearhead mounting surface = 1200 N 20 mm from gearhead mounting surface = 1100 N |
| permissible overhung load(imperial) | 0.39 in. from gearhead mounting surface = 270 lb 0.79 in. from gearhead mounting surface = 240 lb |
| permissible thrust load | 300 N |
| permissible thrust load(imperial) | 67 lb |
| rohs compliant | Yes |
| safety standards | UL CSA CCC CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| degree of protection | IP40 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | BHI62E-15RH |
| Lead Time | Estimated Ship: 10/29/2024 |