Induction motors are optimal for uni-directional continuous operation such as a conveyor system.The smallest frame size (4.09 inch [104 mm]) in the 1/3.73 HP (200 W) output classApproved under typical international safety standards; bears the CE marking
| Power | 200 W (1/4 HP) |
|---|---|
| Rated Speed | 1500 [60Hz] |
| Rated Torque | 1.27 N*m |
| Frame Size | 104 mm |
| Voltage | Single-Phase 110/115 VAC |
| Current | 3 A |
| Electrical Phase | Single-Phase 100 - 115 VAC |
| Frequency | 60 |
| Shaft Type | Round Shaft (No Gearhead) |
| Shaft Diameter | 14 mm |
| Ip Rating | IP40 |
| product line | Oriental Motor® |
| motor type | Induction |
| frame size(imperial) | 4.09 in |
| output power | 200 W (1/4 HP) |
| voltage (vac) | Single-Phase 110/115 VAC |
| frequency (hz) | 60 |
| shaft/gear type | Round Shaft (No Gearhead) |
| output shaft diameter | 14 mm |
| electromagnetic brake | Not Equipped |
| rated torque(imperial) | 11.25 lb-in |
| rated speed (rpm) | 1500 [60Hz] |
| permissible overhung load | 10 mm from Shaft End = 320 N 20 mm from Shaft End = 350 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 72 lb 0.79 in. from Shaft End = 78 lb |
| permissible thrust load | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. |
| rohs compliant | Yes |
| safety standards | UL CSA CCC CE |
| ce marking | Low Voltage Directives |
| insulation resistance | 100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| temperature rise | Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to aluminum heat radiation plate (9.06 in. x 9.06 in.) (0.20 in. thickness). |
| insulation class | Class B (266ºF [130ºC]) |
| overheat protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (non-freezing) |
| ambient humidity | 85% or less (Non-Condensing) |
| degree of protection | IP40 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | BHI62F-A |
| Lead Time | Estimated Ship: 10/29/2024 |