The BLH Series combines a slim, high-power brushless DC motor with a 24 VDC board-type driver to meet your space-saving needs. Speed control range is 100 to 3000 r/min.Analog Driver typeIncreased performance (higher torque and reduced noise)Motor, Driver Power Cable and I/O cable required (*sold separately)
| Power | 0.02 hp |
|---|---|
| Rated Speed | 80 ~ 3000 |
| Rated Torque | 0.048 N*m |
| Frame Size | 42 mm |
| Shaft Type | Round Shaft (No Gearhead) |
| Ip Rating | [Motor] IP40 |
| Shaft Diameter | 6 mm |
| motor type | Brushless DC Motor |
| motor frame size | 42 mm |
| motor frame size(imperial) | 1.65 in. |
| output power | 15 W (1/50 HP) |
| power input | DC |
| shaft/gear type | Round Shaft (No Gearhead) |
| output shaft diameter | 6 mm |
| rated torque(imperial) | 0.425 lb-in |
| electromagnetic brake | Not Equipped |
| variable speed range (r/min) | 80 ~ 3000 |
| permissible load inertia | 0.5 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 2.70 oz-in² |
| permissible radial load | 10 mm from Shaft End = 50 N |
| permissible radial load(imperial) | 0.39 in. from Shaft End = 11.2 lb |
| permissible axial load | The permissible thrust load should not be greater than half the motor mass. |
| rohs compliant | Yes |
| safety standards | UL CSA CE |
| ce marking | EMC Directives |
| insulation resistance (motor) | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity. |
| dielectric strength (motor) | Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity. |
| ambient temperature range | 0ºC ~ +50ºC (+32ºF ~ +122ºF) (nonfreezing) |
| ambient humidity | 85% max. (noncondensing) |
| operating atmosphere | No corrosive gases or dust. Cannot be used in radioactive area, magnetic field, vacuum or other special environment. |
| degree of protection | [Motor] IP40 |
| type | Connector |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | BLM015HK-A |
| Lead Time | Estimated Ship: 10/22/2024 |