The BLM Series features a a compact, high-power and high-efficiency brushless DC motor. The entire motor structure features our latest brushless DC motor technology and has been innovated in pursuit of the optimal performance.No Mounting Screws*Connection Cable Required.
| Power | 0.4 hp |
|---|---|
| Rated Speed | 0.4 ~ 18 |
| Rated Torque | 137 N*m |
| Frame Size | 90 mm |
| Shaft Type | Parallel Shaft Gearhead |
| Ip Rating | [Motor] IP66 [Driver] IP20 |
| Shaft Diameter | 28 mm |
| motor type | Brushless DC Motor |
| motor frame size | 90 mm |
| motor frame size(imperial) | 3.54 in. |
| output power | 300 W (2/5 HP) |
| power input | AC |
| shaft/gear type | Parallel Shaft Gearhead |
| gear ratio (x:1) | 200 :1 |
| output shaft diameter | 28 mm |
| rated torque(imperial) | 1210 lb-in |
| electromagnetic brake | Not Equipped |
| variable speed range (r/min) | 0.4 ~ 18 |
| permissible load inertia | 400000 x 10 -4 kg·m² *When instantaneous stop or instantaneous bi-directional operation is performed = 133333 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 2200000 oz-in² *When instantaneous stop or instantaneous bi-directional operation is performed = 730000 oz-in² |
| permissible radial load | 10 mm from Shaft End = 3483 20 mm from Shaft End = 4216 N |
| permissible radial load(imperial) | 0.39 in. from Shaft End = 780 0.79 in. from Shaft End = 940 lb |
| permissible axial load | 461 N |
| permissible axial load(imperial) | 103 lb |
| components | 5DV200S , JV Series Parallel Shaft Gearhead (200:1) (Metric Shaft) ($578.00) BLM5300HPK , 300 W (2/5 HP) BLE2 Series Brushless DC Motors Brushless DC Pinion Shaft Motor () ($320.00) |
| rohs compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| safety standards | UL CSA CE |
| ce marking | Low Voltage Directives EMC Directives |
| insulation resistance (motor) | 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity. |
| dielectric strength (motor) | Sufficient to withstand 1.5 kVAC at 50 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity. |
| temperature rise (motor) | Temperature rise of the heat sink is 90ºF (50ºC) or less measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity. |
| ambient temperature range | 32ºF ~ 104ºF (0ºC ~ 40ºC), nonfreezing |
| ambient humidity | 85% or less, noncondensing |
| altitude | Up to 3300 ft (1000 m) above sea level. |
| operating atmosphere | No corrosive gases or dust. Cannot be used in a radioactive area, magnetic field, vacuum or other special environment. |
| thermal class | CSA standards: 105 (A), EN standards: 120 (E) UL |
| degree of protection | [Motor] IP66 [Driver] IP20 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | BLM5300HPK / 5DV200S |
| Lead Time | Estimated Ship: 10/29/2024 |