The BLV Series R Type brushless DC motor (BLDC motor) speed control system offers the design of motor and driver significantly reduced in size and weight, yet high-power, and contributes to the battery driven automation.24 - 48 VDCBattery-operatedCompact and Lightweight1.64 ft. (0.5 m) Cable Included*Driver required (sold separately)
| Power | 100 W (1/8 HP) |
|---|---|
| Rated Speed | 1 ~ 4000 |
| Rated Torque | 0.319 N*m |
| Frame Size | 90 mm |
| Shaft Type | Round Shaft (No Gearhead) |
| Ip Rating | [Motor] IP40 |
| Shaft Diameter | 12 mm |
| motor type | Brushless DC Motor |
| motor frame size | 90 mm |
| motor frame size(imperial) | 3.54 in. |
| output power | 100 W (1/8 HP) |
| rated input current | 2.6 A (48 V) ~ 5.1 A (24 V) |
| maximum input current | 10 A |
| shaft/gear type | Round Shaft (No Gearhead) |
| output shaft diameter | 12 mm |
| rated torque(imperial) | 2.81 lb-in |
| electromagnetic brake | Equipped |
| brake type | Power off activated type, automatically controlled by driver |
| cable direction | Opposite Output Shaft Side |
| cable length (included) | 1.64 ft. (0.5 m) |
| variable speed range (r/min) | 1 ~ 4000 |
| resolution | 0.01º (36000 Pulses per rotation) |
| resolution(imperial) | 0.01º (36000 Pulses per rotation) |
| permissible load inertia | 23 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 126 oz-in² |
| permissible overhung load | 10 mm from Shaft End (3000 r/min) = 150 N 20 mm from Shaft End (3000 r/min) = 170 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End (3000 r/min) = 33 lb 0.79 in. from Shaft End (3000 r/min) = 38 lb |
| permissible thrust load | 25 N |
| permissible thrust load(imperial) | 5.6 lb |
| power input | DC |
| safety standards | UL |
| insulation class | [Motor] UL / CSA Standards: 105 (A), EN Standards: 120 (E) |
| insulation resistance (motor) | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity. |
| dielectric strength (motor) | Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity. |
| temperature rise (motor) | The temperature rise of the windings is 60ºC (108ºF) max. and that of the case surface is 50ºC (90ºF) max measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity. Attach to aluminum heat sink 165 x 165 mm (6.5 x 6.5 in.) thickness 5 mm (0.20 in.) |
| altitude | Up to 1000 m (3300 ft. ) above sea level |
| vibration | Not subject to continuous vibration or excessive impact. In conformance with JIS C 60068-2-6 "Sine-wav vibration test method" Frequency Range: 10 Hz to 55 Hz Pulsating Amplitude: 0.15 mm (0.006 in.) Sweep Direction: 3 directions (X, Y, Z) Number of Sweeps: 20 times |
| ambient temperature range | 0ºC ~ +40ºC (+32ºF ~ +104ºF) (nonfreezing) |
| ambient humidity | 85% max. (noncondensing) |
| operating atmosphere | No corrosive gases or dust. This product should not be exposed to oil. Cannot be used in radioactive area, magnetic field, vacuum or other special environment. |
| degree of protection | [Motor] IP40 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | BLMR5100KM-A-B |
| Lead Time | Estimated Ship: 10/22/2024 |