The BLV Series R Type brushless DC motor (BLDC motor) speed control system offers the design of motor and driver significantly reduced in size and weight, yet high-power, and contributes to the battery driven automation.24 - 48 VDCBattery-operatedCompact and LightweightLow speed operation from 1 r/minCompatible with Modbus (RTU) and CANopen Communication *Driver Power Cable required (sold separately)
| Input Voltage | DC |
|---|---|
| power supply | 24 - 48 VDC |
| power input | DC |
| input signals | 4 Inputs, Photocoupler Input Method |
| output signals | 2 Outputs, Photocoupler and Open-Collector Output |
| main operating functions | Continuous Operation, Positioning Operation, JOG Operation, Return-to-Home Operation |
| operating data setting number | 256 Points |
| max extension length | Motor and Driver Distance: 3.5 m (11.5 ft.) (when a separately sold connection cable is used) |
| time rating | Continuous |
| safety standards | UL CE |
| ce marking | EMC Directives |
| insulation resistance (driver) | 100 M Ω or more when 500 VDC megger is applied between the power supply terminal and heat sink after continuous operation under normal ambient temperature and humidity. |
| dielectric strength (driver) | Sufficient to withstand 0.5 kVAC at 50Hz applied between the power supply terminal and the heat ink for 1 minute after continuous operation under normal ambient temperature and humidity. |
| temperature rise (driver) | The temperature rise of the heat sink is 50ºC (90ºF) max measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity |
| altitude | Up to 1000 m (3300 ft. ) above sea level |
| vibration | Not subject to continuous vibration or excessive impact. In conformance with JIS C 60068-2-6 "Sine-wav vibration test method" Frequency Range: 10 Hz to 55 Hz Pulsating Amplitude: 0.15 mm (0.006 in.) Sweep Direction: 3 directions (X, Y, Z) Number of Sweeps: 20 times |
| ambient temperature range | 0ºC ~ +40ºC (+32ºF ~ +104ºF) (nonfreezing) |
| ambient humidity | 85% max. (noncondensing) |
| operating atmosphere | No corrosive gases or dust. This product should not be exposed to oil. Cannot be used in radioactive area, magnetic field, vacuum or other special environment. |
| degree of protection | IP20 |
| communication protocol | Modbus RTU Mode |
| electrical characteristics | EIA-485 Based. Use a shielded twisted pair cable and keep the total wiring distance including extension to 32.8 ft. (10 m) or less. |
| transmission/reception mode | Select either 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, or 230400 bps (initial value) |
| connection type | Up to 31 units can be connected to a single programmable controller. |
| canopen electrical characteristics | In conformance with ISO 11898 Use the CAN-Bus cable |
| communication profile | In conformance with CiA DS301 Version 4.2.0 |
| device profile | In conformance with CiA DSP402 Version 4.0.0 |
| node id | 1 to 127 |
| bit rate | Selectable from 1 Mbsp, 800 kbps, 500 kbps (iniital value), 250 kbps, 125 kbps, 50 kbps, 20 kbps, 10 kbps |
| maximum bus length | 25 m (82 ft.) (Maximum bus length at 1 Mbps) |
| communication objects | NMT (Network Management) SDO (Service Data Object: 1 SDO server) PDO (Process Data Object: 4 Receive-PDO, 4 Transmit-PDO) EMCY (Emergency Object) SYNCH (Synchronization Object) |
| operation modes | Profile Velocity Mode (pv) Profile Position Mode (pp) Homing Mode (hm) |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | BLVD-KRD |
| Lead Time | Estimated Ship: 10/22/2024 |