Direct Drive Fan/Blower Motor, 37 W
| Item | Direct Drive Blower Motor |
|---|---|
| Motor Design | Permanent Split Capacitor |
| HP | 1/20, 1/30, 1/50, 1/75 |
| RPM Range | 1,001-1,100 |
| Nameplate RPM | 1,075 |
| Voltage | 115V AC |
| Frame | 42 |
| Motor Mounting Type | Rigid Base |
| Phase | Single |
| Motor Enclosure Design | Open Air-Over |
| Full Load Amps | 0.27/0.36/0.55/0.78 A |
| Inverter Rated | No |
| Max. Ambient Temp. | 104 deg F |
| Shaft Dia. | 1/2 in |
| Motor Shaft Rotation | CW |
| Ins. Class | B |
| Voltage Compatibility | 115V AC |
| Mounting Stud Length | 8/25 in |
| Motor Service Factor | 1 |
| Motor Flange Type | Non-Ventilated |
| Capacitor Required | Yes |
| Motor Mounting Position | Horizontal |
| Features | Fan Coil - Dual Wheel Blower Motor |
| Motor Bearings | Ball |
| Output Watts | 37 W |
| Body Dia. | 5 in |
| Weight | 11.13 lb |
| Bolt Circle Dia. | 4-5/8 in |
| No. of Speeds | 4 |
| Duty Cycle | Continuous |
| Shaft Length | 21-1/4 in |
| Motor Sub Application | HVAC, R |
| Length Less Shaft | 3-1/2 in |
| Motor Shaft Design | Keyed |
| Motor Thermal Protection | Auto |
| Standards | CSA, UL |
| Conduit Box Position | Not Applicable |
| Manufacturers Warranty Length | 2 yr |
| Hz | 60 |
| Motor Frame Material | Steel |
| Mounting Stud Pattern | (6) 0.32/0.30 x 0.64/0.62 in |
| Motor Application | Blower; Fan |
| Overall Length | 24-13/16 in |
| Duty | Continuous |
| Bearing Protection | Automatic |
| Number of Shafts | 2 |
| Lead Length | 36 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |