118 Degree General Purpose Taper Shank Drill Chicago-Latrobe 110 Steam Oxide HSS RHS/RHC 1-1/16
| Item | Taper Shank Drill Bit |
|---|---|
| Number of Flutes | 2 |
| Overall Length | 11 1/4 in |
| Drill Bit Size | 1 1/16 in |
| Flute Length | 6-5/8 in |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 1.0625 |
| Drill Bit Point Angle | 118 Degrees |
| Drill Bit Material | High Speed Steel |
| Shank Type | #3 Morse Taper |
| Flute Type | Spiral |
| Morse Taper | #3 |
| List Number | 110 |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Finish | Black Oxide |
| Drill Bit Dimension Type | Fractional Inch |
| Grade | General Purpose |
| Application | For Alloy, Carbon And Tool Steels And Cast Iron |
| Point Type | Conventional Point |
| Depth:Dia. Ratio | 4 xD |
| Depth x Dia. Ratio | 4 xD |
| Material | HSS |
| Standards | Not Rated |
| Point Angle | 118 |
| Drill Style | Taper Shank Drill |
| Diameter | 1.0625 |
| Shank Length | 4.625 |
| Left/Right Hand | Right |
| Measurement System | Fractional Inch |
| Series | 110 |
| Coolant Fed | Non-Coolant Through |
| Maximum Drilling Depth | 6-5/8 in |
| Helix Angle | 28 Degrees |
| Spiral Direction | Right Hand |
| Drill Diameter Tolerance | +0.0000 in /-0.0015 in |
| Material Grade - Machining | General Purpose |
| Primary Material Application ISO Code | P, K |
| Primary Material Application | Cast Iron, Steel, Tool and Die Steel |
| Shank Type - Machining | Taper |
| Drill Bit Point Type | Conventional Point |
| Finish - Machining | Black Oxide |
| Material - Machining | High Speed Steel |
| Taper Shank Size | MT3 |
| Package Quantity | 1 |