Air Impact Wrench, 1/2" Square Drive
| Item | Impact Wrench |
|---|---|
| Free Speed | 7,000 rpm |
| Air Inlet | 1/4 in NPT |
| Handle Type | Pistol Grip |
| Required Pressure | 90 psi |
| Tool Weight | 4.7 lb |
| Handle Material | Rubber |
| Torque Range | 70 to 555 ft-lb |
| Air Inlet Size - Air Tools | 1/4 in NPT |
| Max. Bolt Capacity | 1/2 in |
| Blows per Minute - Air Tools | 1,350 |
| Min. Hose Size | 3/8 in |
| Item - Air Impact Wrenches | Air Impact Wrench |
| Average CFM @ 15 Second Run Time | 6.2 |
| Body Style - Air Tools | Pistol |
| Anvil Length - Air Impacts | 2 in |
| Max. Torque | 960 ft-lb |
| Retainer Type - Air Impacts | Ring |
| Duty Cycle - Air Tools | General Duty |
| Anvil Type - Air Impacts | 2" Extended |
| CFM @ Full Load | 25 |
| Drive Size - Air Tools | 1/2" Square |
| Overall Length | 8-7/8 in |
| Housing Material | Composite |
| Retainer Type | Friction Ring |
| Features | Hard Anodized End Plates, One-Hand Reverse System (Ring System), Resistant To Most Chemicals Used In Workshops |
| Number of Speed Settings | 3 |
| Clutch Style | Twin Hammer |
| Impact Rated | Yes |
| Tool Style | Compact |
| Min. Air Pressure | 90 psi |
| Impacts per Minute | 1,350 |
| Impact Sound Level | 105 dB |
| Max. Air Pressure | 90 psi |
| Air Consumption | 25 cfm |
| Air Pressure | 90 psi |
| Standards | EN ISO 11148-6:2013, ISO 15744, ISO-28927-2 |
| Breakaway Torque | 960 ft-lb |
| Power to Weight Ratio | 204 ft-lb/lb |
| Drive Type | Extended |
| Exhaust Location | Bottom |
| Vibration Level | 11.3 m/sq sec |
| Extended Anvil Length | 2 in |
| Fastening Torque | 555 ft-lb |
| Duty Rating | General Duty |
| Built-In Light | No |
| Power Source | Air Powered |
| Drive Size | 1/2 in (Square) |
| Package Quantity | 1 |